Reply With QuoteThanks for the replies fellas. I reckon this white gold thing may be faulty!! Hmmmm may go back to Jaycar and see if they still have the actual gold goldies I originally bought.
Leroy
How to make a goldie....101...ok Houston...I'm having a problem
I made a couple of goldies ages ago and want to make another. If I go through the icprog wizzard, when I get to the switch to phoenix mode step where I browse to the GFGold v226 eeprom.hex file to load, when I continue I get the error resetting card failed!!
If I manually try to load the file I get the dreaded Verify failed at address 0000h !
The goldie I have is a new white one from Jaycar. The previous ones were well gold.
I have tried everysing....help! No I mean help!!
Leroy
XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS
| Look Here -> |
Thanks for the replies fellas. I reckon this white gold thing may be faulty!! Hmmmm may go back to Jaycar and see if they still have the actual gold goldies I originally bought.
Leroy
XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS
I should get a propper white card for aurora not one of these pretend white gold cards
Leroy
XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS
.... and maybe post in the Wafer section, this has nothing to do with MOSC
Cheers
Ted (Al)
load the pic hex and load eeprom via crd files
you may get more help in wafer or programing area
not many no what mosc is
I can send ya a couple of old goldies that you can clean and start again with if you like.
It's hard to make a come back when I havn't been anywhere
I finally got my head together, now my bodies falling apart.
為什麼不做你被塞滿
See what happens when i post in haste! How do I move it?Originally Posted by Al Bundy
Leroy
XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS
3 old Goldies on there way, good luck.
It's hard to make a come back when I havn't been anywhere
I finally got my head together, now my bodies falling apart.
為什麼不做你被塞滿
You're too good to me3 old Goldies on there way, good luck.
thanks,
Leroy
XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS
Leroy..
these new white goldies failling is NOT an isolated incident...
I had a few over here in Perth that did exactly the same thing & i was using a few different progs.. all same result.. errors...
Leroy & fergs I got one of the white goldies from jaycar and not a problem at this stage, I guess by the sound of it you guys got sharp end of the stick
Democracy & Ignorance = A Winning Combination
check part number
ZZ8800 white ones are PIC16F84
but Jaycar also have an identical looking part number ZZ8810 with PIC16F877
Also goldies still work with Aurora, handy in the caravan but for how much longer who knows, IRD1 supposed to end this year.
if I want to play with this stuff am i best to get a gold, white, emerald or a fun wafer card?
So many choices...
Silver
like ?
Yes looks like the one
I just had a play with a programmer and some old cards back from the " goldy " days that I found in my treasure collection.
Open Platform Gold cards such as these at site advertiser Kangamail
are still working fine and were programmable. I have had them for probably 6-7 years and they are good value at $7 each at the above link.
I personally would not bother paying more for a silver card. What is the point ? I experimented with Gold , Silver , Emerald and Fun cards and none are any better than the other unless there is some specific application that requires a larger capacity.
Posting Permissions
Bookmarks