Old season should work fine
Hi, Have been playing around with GW. I have an old season interface card, I think, I used to use it with the likes of wallbanger ages ago on the old IRD1 system. Can I use this card to work with GW?
any tips here or do I need a new season i/f to get it running?
Look Here -> |
Old season should work fine
When you do things right, people won't be sure that you have done anything at all
sounds like a logger card.
it probably won't work.
buy a new season interface from sattronics etc.
ok. i start the GW server. set up the client as a remote host, connect and can see the card details, then start the client and all it does is say connecting. am i doing something wrong or is it waiting for the season card to talk to the receiver?
and i used to use it a long time ago with wallbanger and it worked ok in the receiver....
or make one with just a max232 chip, 4 x1uf tantalum caps and a 1k resistor....
then solder straight onto the internal cam smart card socket
Look here....learn something .
wooo, hoooo!!
after extensive reading and fart arsing around i got it to work. (with the old logger card too!!!!!)
thanks guys......
Well done! So what was the trick?
Leroy
XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS
setup server
run client as remote to server i/p, setup user in client as serial, connect....off we go...
Did you read the following post?
Leroy
Don't understand your question mate...?
Bookmarks