You can't just default the master code, once in programming you have to default the whole panel.
Most of us have a programmer module to gain access to the panel if the installer code is not known.
Does any body know how to default a master code on a DL 250???
Look Here -> |
You can't just default the master code, once in programming you have to default the whole panel.
Most of us have a programmer module to gain access to the panel if the installer code is not known.
Das smart programmer gets you straight in .. I have got one but they are rare as hens teeth!!
hotswap the chip with one that u know the installer code of then swap back.
this will tell you how to default the panel from the key pad
should be on page 11
You can't default the master code from the codepad unless you know the installer code. If you know the installer code then you can find the master code.
Programmer or hot swap is the only way if you have neither.
Paul
Not quite as rare to make them a collectors item worth serious money, but rare enough.
I have 3. One brand new in the box, one as new lent to a mate a couple of times and one that has done all of my work over the years.
I have been looking through all of my excess programmers recently an am thinking about getting rid of some of them. No need for multiples these days.
bss904 how much do want for a programmer?
Hi Guys sorry to revive a old thread this is my first post on Austech so please be gentle
I also have a old DL250 the is still running perfect however I cant find someone to dial in and set the system to call my mobile if the alarm is activated , Every alarm company I call tell me to buy a new system as the DL250 is now obsolete and no one works on them....Spending $600 on a new alarm just so it can dial me if it goes off seems a little pointless though
So by any chance is there a tech out there who can either dial into my panel with dasload (the alarm picks up if you call my number) or come out to me in Frankston , Victoria with a smart programmer ? id be happy to pay a service call for services if need be, I do have a copy of Dasload but don't have a computer old enough to run it
Cheers
Contact Thermal Alarms in Brisbane 07 38812030 they are pretty good with old panels. they may be able to help you and dial in to it.
Bookmarks