smargo dont work with gamma cards
Hi, I'm new to this forum and I am interested in how to adjust gamma to work on smargo reader on the pc, smargo reads the map says that works but does not have a picture like this we are setting CCcam.cfg
#
Serial # READER: / dev/ttyUSB3
SmartCard Clock Frequency: / dev/ttyUSB3 6000000
CAMKEY: / dev/ttyUSB3 00 00 00 00 00 00 00 00
CAMDATA: / dev/ttyUSB3 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
TRY ALL CHIDS: / dev/ttyUSB3
please who knows for assistance
Thank Sp@sic
Look Here -> |
smargo dont work with gamma cards
my smargo working with GAMMA
without any problems
Does the gamma work in a decoder by it's self?
If it doesn't, then it will not work in a smargo either.
Reality is an invention of my imagination.
ಠ_ಠ
Reality is an invention of my imagination.
ಠ_ಠ
You stated "Although the box read the cards, and it shows that update the emc/emm are update ", then you do not need to adjust the boot file.
I've smargo with DM 7020 (Gemini image) and gamma card with following settings:
SERIAL READER : /dev/usb/tts/0 smartreader+
SMARTCARD CLOCK FREQUENCY: /dev/usb/tts/0 6000000
CAMKEY: /dev/usb/tts/0 00 00 00 00 00 00 00 00
CAMDATA: /dev/usb/tts/0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
#TRY ALL CHIDS : /dev/usb/tts/0
SERIAL READER : /dev/usb/tts/1 smartreader+
SMARTCARD CLOCK FREQUENCY: /dev/usb/tts/1 6000000
CAMKEY: /dev/usb/tts/1 00 00 00 00 00 00 00 00
CAMDATA: /dev/usb/tts/1 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
#TRY ALL CHIDS : /dev/usb/tts/1
i need help to read gamma with smargo on DM7025.i have installes the drivers,fix the bootup file(echo 52 > /proc/progress
modprobe ohci-hcd
modprobe ftdi_sio)
,but cccam says no card on /dev/usb/tts/0
cccam.cfg:
SERIAL READER : /dev/usb/tts/0 smartreader+
SMARTCARD CLOCK FREQUENCY: /dev/usb/tts/0 6000000
CAMKEY: /dev/usb/tts/0 00 00 00 00 00 00 00 00
CAMDATA: /dev/usb/tts/0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
TRY ALL CHIDS : /dev/usb/tts/0
tryed with #TRY ALL CHIDS : /dev/usb/tts/0
but nothing also.smargo has been changed to dreambox kernel.do i have to change anything else?firmware is v103.
plz help
well looking at the two last posts when you compare the two cccam cfg one works one don't you can see the differants
Tagg
Bookmarks