gamma update

[privi881]

hi there,
just received a gamma card preloaded with os 1.40
question is how to do i update the card with ***.gam file through phoenix without damaging it?
use gammaloader 1.0, 1.1, sataid without changing any of the presets, loadme, gammaloader 2.5?
im new to this and would appreciate a little help
for example:
in gammaloader 1.0 their is a function of CLEAN - do i touch this? or just load the file and press PROGRAM?
thank you in advance
achilleas

[LeroyPatrol]

just use gamma loader 1.1 but I can't remember the freq but I think 6mhz worked. If not it will be 3.57. That sataid loader from memory had a nasty option the stuffed a few cards. What service are you trying to use this card on?

Leroy

[Godzilla]

Yeah stay away from the sataid loader or make sure you untick the update os option, plenty of people lost their ATR's due to forgetting this one option when loading.

Yes clean card then program.

Sometimes twice from what i remember.

[ger1]

What file are you trying to load?

[madmee]

hello
program it 2 times with the same file if it is new .

use 6 mhz or 3.79 mhz both working

this what i did with new one

1.1 loader is the best for euro files

thanks

[privi881]

thank you for the advise
especially on sataid function to program os
trying for n@va - mchs hellas
will keep posting on progress of things
achilleas