can be done via ich8 so the 9 should work
you need to cut 2 tracks and install a switch
thier are tuts around am at work tonight if you dont find any can send tomorrow
Just wondering can i flash using Inter ICH9 chipset for the new benq drives or must i buy the sata via 6421 pci card??
any tut's handy anyone??
cheers
Look Here -> |
can be done via ich8 so the 9 should work
you need to cut 2 tracks and install a switch
thier are tuts around am at work tonight if you dont find any can send tomorrow
From what i have been reading, you dont have to cut the tracks anymore as that problem has been overcome. Correct me if im wrong
but if its a matter of using the VIA chipset and NOT cutting the track.. ill go buy that
want to keep my mods reversible in case of warranty issues
theres lots of info but its going to take ages looking through old stuff to actually find a good write up that is current, hence my asking here =)
anyhow thanks and keep the info coming
will be buying box on thursday so hope to have it sorted by then
i still cut tracks and use a switch
but found dosflash 1.1 didnt work with intel had to use 1.3
just had a bit of a look around and it seems that can do then without cutting tracks ect
but you need the via chipset
Great thanks, will have a read through it
Just found a pci sata card from my old computer
its got VIA 6421L on it, would that work or it has to be 6421A???
been doing some reading so far
correct me if you think u have better method
i need
-iPrep v1.06 with dosflash16 on a bootable usb
-via card (6421L which i have)
-benq ixtreme 1.4.1 firmware (cant find yet - any help? )
and basically thats it?
update
sourced the FW so should be set to go
just need to make sure i dont brick it as its first time im doing FW flashing
chips i have done before but ill do the cheaper option this time
if you have anything to add please do
you can buy a sata controller card with the 6421a chipset for $13.68 delivered.
i realise i have a 50 50 chance of either getting a hitachi or a benq with the new arcade pack 360 (hdmi and will look to get new realease date so its the falcon mobo) so if by any chance i do get the hitachi is that still flashable???
need to know before tomorrow afternoon
thanks
seems you need a passkey device soldered on to flash, fk that may aswell buy the nme
anyhow i MUST get the benq it seems...
the passkey wont work with sil3112 or Via chipsets, you need onboard nforce3 for it to be of any use.
I can do them mate, I remove from dvd rom, dump fw, create hacked fw, then reprogram the tsop and resolder to dvd rom. Not many like doing them though.
I've done a few Austech members 0079 drives
Cheers
Mick
cheers mick i will keep you iin mind but hopefully i get the benq as my friend works at GAME and hopefully he will power it on for me to eject the drive (going now to the shops)
will prob be back with questions coz i fuxed it trying to flash LOL
oh i am the shizz lol jokes jokes...
got it working despite a few hicups but its works! took a good 3 hours start to finish but next time i should be able to do it in half hour
thanks to all that helped
btw 5 stores i went to had run out of xbox's all together and another 2 only had pro bundles left
cant believe it was so hard to find a shop who had one in stock
Last edited by tek_01; 01-02-08 at 01:12 AM. Reason: EDIT: I got all the files from the read on my USB now, i gotta keep these files correct?
Bookmarks