if it's for a c-band dish, i'd just use 05150 on both.
Hi all
I'm not certain what the correct procedures are, do you have to set the local oscillator set up low band using 5150 and high band using 10 750 and if so what would you set the threshold to ? (I have tried something like this with no luck) I've tried using a different satellite and renaming it but the DM 500 dream box doesn't like having 2 satellites 166 ° East for example one I called Intelsat C. which gave me the opportunity to set up 2 independent local oscillator's 5150 and 10 750 but the dream box was only happy with one or the other not both
help needed
Look Here -> |
if it's for a c-band dish, i'd just use 05150 on both.
This are my config for LNB C-band DM500:
Low band : 05150
High band : 05150
threshold : 05150
sk8ergeek
Thanks for your replies,
The problem I'm having is the ability to combine Intel sat 2 ku with Intel sat 2 C. band how do you set up the transponder configureation because the dream boxe is reluctant to combine the two bands while looking at the one satellite. Because you're using different LNB's for the same satellite?
redrat
Bookmarks