Does this page help?
this is annoying the crap out of me , i had it going last week with correct picture to audio and then i did a re-flash but forgot to save the sat file and now i can not for the life of me get it right.I have video from one game and audio from another.
So if anyone has the video and audio working properly could you let me know what the pid's you are using are .
thanks
6667
dont say linux if i wanted it id install it
Look Here -> |
Does this page help?
I might be wrong here as to your problem, but I suggest you use the audio button on the remote and you will see there are several audio tracks. Choose the right one for the pic you are watching.
Its the same as when watching FBO channels.
You can change audio from 2 channel to Dolby 5.1.
You may already know this and your problem is something else, but I hope this works.
Thanks for the link shows exactly what i have so will have to keep looking
thanks mate but the issue is the audio is correct yet the video is showing SPH which is
1041
1042
but the Spa is
1011
1012
so what i cant figure is why the two different VPID's 1011 and 1041 are showing the same picture
dont say linux if i wanted it id install it
i just had a look sandery and yes should have been SPB
this morning
SPA
video = everton game ---- audio = chelsea game
SPB
video = everton game ---- audio = everton game
No channel what so ever had chelsea video showing
dont say linux if i wanted it id install it
I had an old Post on the old server that had the correct Pids for SPM (=Matrix) etc.
You'd name them Active MATRIX, Active TL, Active TR, Active LL, Active LR.
They worked whenever 4-way screen was used and had been accurate for a number of years, still are. I might look through my channel list later.
5th Wyking Panzer Division
Goto 12447, V, 27800 and do an 'advanced search' for each. (Or otherwise note those channels that load-up on a general search of this frequency then recognise the Pids from below, you then RE-NAME each per example. The remainder of same that load on a general search can be deleted or skipped, typically these hold multi audio channels that are not required).
Audio is native to each. Functions only when 4-way screen interactive service in operation, sometimes it might be split 2-ways etc, still - these are fine. Austar.
Suggested Name as your decoders editing function allows!
Active MATRIX: VPid 1021, APid 1022, PCR 8150. (Loads as SPM)
Active TL: VPid 1011, APid 1012, PCR 8150.
Active TR: VPid 1031, APid 1032, PCR 8150.
Active LL: VPid 1041, APid 1042, PCR 8150.
Active LR: VPid 1051, Apid 1052, PCR 8150.
Matrix = the 4-way screen!
Active TL = Top Left screen of the 4-way Matrix in full.
Active TR = Top Right screen of the 4-way Matrix in full.
Active LL = Lower Left screen of the 4-way Matrix in full.
Active LR = Lower Right screen of the 4-way Matrix in full
FAVOURITES:- Sometimes folk like to set favourites in a decoders channel list, in which you assign a name to a group, you might for example call one group Active or Interactive then drop these in.
5th Wyking Panzer Division
is what i had so i did as you suggested and deleted them all and rescanned and re-named them as mentioned .
I still have the same issue where i do not get the Active TL picture.For the Active TL i get the same picture as Active LR.Thanks for the help i will have to dig through all my drives to see if by chance i did back it up from when it was working.
Zzzz mods to delete at will.
fandtm666 wroteK!- is what i had so i did as you suggested and deleted them all and rescanned and re-named them as mentioned.
ATM they are showing the proggy 'DIRT' on all four till 1:30am 6 Feb, could it be that at that one time they had an identical scene mebbe? (Atm during this event, no sound on the Matrix should be heard btw).I still have the same issue where i do not get the Active TL picture. For the Active TL i get the same picture as Active LR.
Still fine here. The other day TL had to wait an unusual few seconds for pics to appear, rather odd, never happened before. Unsure if these are both crypts?
Checks okay on Toppy 3000CIpro, PVR5000. The PMT column as you show is fine too.
5th Wyking Panzer Division
i got the same problem,
did you get it working yet fandtm666?
I have the latest PLI Imaged install on my DM7025, however it does not present you with a list of Pids to select, however the Green Button does work on my DM600. Is there a different button to use on the DM7025?
11762 H 27800 3/4 has these channels now
On DM500s I get SPA but have never got picture, can get SPM, SPH & channel with v/pid of 1051 - a/pid 1052 but can not get v/pid 1041 -a/pid 1042
I have got v/pid1041 -a/pid 1042 in the past but it deletes v/pid 1051 -a/pid 1052 when i put these in
Bookmarks