Season & Wallbanger
Can someone please tell me how to set wallbanger up to work with a season.
I put my goldie in the season and I can get pic but cant log.
I added a provider name, hex serial, HMK, provID,Lain Masterkey.
My question is, what do I choose where it says CoCo and what do I put in for these- EMM ID, ECM ID, CoCo-3, and under Prov 10 is got Beacon Ch, Date.What do I have to put for them?
Also do I have to put in Plain Keys.
All help greatly appreciated.
| Look Here -> |
Wallbanger is a logger and emulator. With the card in the season you can log, with it out you set up wallbanger to emulate. To log you need to play around with the data speeds... ie start with 9600 8N1 (9600 8E1 worked with the old UEC 720) and use a straight through serial cable. Don't think you have to use any keys just to see a log... so long ago it is hard to remember. Once you get a log being displayed and if you get pictures you should be able to see how the card works.
Wallbanger Tutorial.
G'Day Guys and gals,Originally Posted by Min
I hope this works or I'll have to find another way to upload.
Kindest Regards, " The Druid ".
Credits to " Duwgati ".
Last edited by beer4life; 14-12-08 at 10:28 AM.
I`m not sure what to put in for parts when adding a provider.
EEM ID- its got 06 02
ECM ID- its got 06 02
Beacon Ch.- its empty
Date- its empty
Do I have to change or put any details here? Also do I have to put in some plain keys.
from memory all you need is to setup the comms and push the glasses button as things changes between emulation and logging i think you have have to restart the program for it to change.
To me that doen`t sound right. It has to be on Irdeto then I have to add a provider. If not and I leave it on eg:Nova/Hellas it will use the keys provided for it.
I just want to find out exactly what needs doing so then I can disconnect this pc and take it to the other room where the decoder is, as my laptop doesn`t seem to work properly.
depends i just used it with no details in at all and had the glasses button in and on the right channel with the card in the back of the season2 and checked the logs after going through all the channels.If you tick irdeto and put full details in it will come up with the channel id down the bottom lefthand corner with the glasses buttom no in. Did you check your pm. hope that helps i just killed and reanimated a old poxtel v1.9 and stuck aurora on it.It took awhile to workout how to ad chids you have to calculate a signature.
it was my understanding that old fox provider cards dont have provision to run aurora from prid10 on them
Posting Permissions
Reply With Quote
Bookmarks