card splitters

[sublib25]

Any one had success with these,
Tried the smart wi - kept dropping out all the time,
Swapped for the Epsilon - comes up as invalid card or stuck at smart card initialising. Using strong 4658X with purple cam.
Tried 3 different card types and no joy with any.
Minister for finance turning into minister for war.
Please help.All sugestions appreciated(regarding the splitter only)

[autertip]

I'm using it with a 4.1 card successfully in both my 4658x. One card shared between two units.

I have the special Irdeto Firmware version. 2.41T1 on the smartwi master box and the strong 4658x is running the latest Version:107.

I dont use a CAM. My wireless clients slides straight into the internal card reader.

The only problem I have is that at least 1-2 times a month I do have to reset the wireless card. For that I simply pull it out and put it back into the 4658x

Are you on the same versions of firmware as my setup?

[z80]

which provider mate?

[sublib25]

I have the special Irdeto Firmware version. 2.41T1 on the smartwi master box and the strong 4658x is running the latest Version:107.

Was using the same,tried in cam and slot no joy.
Swapped for the Epsilon as I had heard good reports regarding Irdeto 2.
Can't get it to run with genuine Aurora cards or others.
Thought at least Aurora sub would work V4.1 & V5.
No programming or special set up required I assume??

[Jason_dinAlt]

I found with my chucky and bob 4.1s that 2.32 worked the best. Only time I really had to reset it was when power went out or austar had rolled keys and the splitter wasnt on at the time
And when whitey came on the scene I didnt havent to do squat, because the ATR is the same all I had to do was take chucky out of the splitter and put whitey in.
Have you transferred the ATR to the clients? this may resolve the invalid card problem. But the stuck on initialising sounds like your cam is suspect, try booting the stb with no card in the cam and see if it is still in initialising, if it is youve got a dodgy cicam

Ive also noticed that some boxes work fine with an austar card or a whitey in the slot or cam, but refuse the client card, the topfield3200 does, has your strong ever accepted the client card?

[YO JC]

G'Day all

I purchased the smart wi from sattronics, loaded with 2.41 version 2 client cards working perfectly, but the 3rd client card gives INVALID SMART CARD,I'm using all Strong Srt 4653x, srt4910.

Thanks Regards
JC

[bigfella08]

I haven't had the chance to try any of this stuff yet

But let us know if you have any luck..................



Cheers

[YO JC]

Thanks Bigfella

Still same results 2 are working very well, but client #3, I suspect the 3rd client card is faulty, i see lights flashes when the card inserted but doesn't flash as should, Is there a way to program the client card.

Thanks
JC

[bigfella08]

Sounds like your client is not paired up properly

Follow the link (see instructions) and pair that card to the client again.

Cheers

[YO JC]

Thanks again Bigfella

I have tried to set the mentioned card first (as the #1 client) same results, the LED flashes slowly when I insert the client card, it does not flash like the other client cards.

PS: thanks for the links I have tried most files with the same results, I just sent an Email to sattronics about the issue, I will let you know with the update

Thanks Regards
JC