with a cam installed, just try restarting your cam after you have your logger set up. I find I have to do this on my 7020 with cccam installed.
Leroy
Hi all
Has anyone had problems trying to connect to deambox with pli image installed ?
I had hydra installed and it connected without any problem on port 31338
and logged fine but no such luck with pli jade....(with or without cams)
Look Here -> |
with a cam installed, just try restarting your cam after you have your logger set up. I find I have to do this on my 7020 with cccam installed.
Leroy
Thanks leroy i will give it a go
hi im using IRD_LogExtract
I notice from previous post you originally had some trouble getting log extract to work, was there anything else you did to get it going?
Log extract wouldn't work for me when using a gemini image, as soon as i flashed flashed my 7020 to IOlite it worked a treat. I've now come back after a few months and no matter what i do the bloody thing wont work.
Guess dvbsnoop is my only option for now....can't be bothered reflashing atm
Cheers, RHCP.
This just repeats over and overas soon as i click 'stop' i get11 Jan 2009 0036 Attempting to connect to 192.168.1.32:31338
11 Jan 2009 0037 TCP Socket Error
11 Jan 2009 0037 Sending HTTP Header
11 Jan 2009 0037 TCP Socket Error
11 Jan 2009 0037 Not Connected
11 Jan 2009 0037 Attempting to connect to 192.168.1.32:31338
11 Jan 2009 0038 TCP Socket Error
11 Jan 2009 0038 Sending HTTP Header
11 Jan 2009 0038 TCP Socket Error
lol.11 Jan 2009 0038 Connected
Last edited by RHCP; 11-01-09 at 01:32 AM.
Democracy: Three wolves and a sheep voting on what's for lunch.
I found I just had to restart the cam after setting up IRD Log extract. I'm using Gemini 4.30 on the 7020 and it works with Pli Jade on the 600. Try rebooting your 7020, fire up Ird extract then restart the cam.
Leroy
Bookmarks