-
This is the newcs file, do i need to change the newcamedport to 6666? as is the case in cccam.cfg
cHeers
casull
<?xml version="1.0" ?>
- <newCSconfig>
- <readers name="Card Readers">
- <device>
<name>Inbuilt Slot</name>
<type>Sci</type>
<mhz>500</mhz>
<node>/dev/sci0</node>
<parity>even</parity>
<export>yes</export>
<enabled>yes</enabled>
<blocksa>no</blocksa>
<blockua>no</blockua>
<blockga>no</blockga>
<boxid />
<PTShandshake>no</PTShandshake>
<Seca-PPV>no</Seca-PPV>
<crypto-special>no</crypto-special>
<carddetect>no</carddetect>
<newcamd_port>11111</newcamd_port>
<autosid>yes</autosid>
<priority>round</priority>
</device>
</readers>
- <radegastserver>
<enabled>no</enabled>
<port>10003</port>
<allow>ALL</allow>
</radegastserver>
- <cache>
<emm>20</emm>
<ecm>-1</ecm>
</cache>
- <debug>
<level>normal</level>
<type>init</type>
<output>console,tcp</output>
<logfile />
<console_options>normal,init</console_options>
<file_options />
<udp_host>192.168.0.100</udp_host>
<udp_port>1000</udp_port>
<udp_options />
<tcp_port>3001</tcp_port>
<tcp_options />
</debug>
- <newcamdserver>
<enabled>yes</enabled>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<name>newcs</name>
<userfile>/tmp/users.txt</userfile>
- <user>
<name>server</name>
<password>1234</password>
<sidoverride>on</sidoverride>
<au>on</au>
</user>
- <user>
<name>user1</name>
<password>1234</password>
<au>off</au>
<sidoverride>no</sidoverride>
</user>
</newcamdserver>
</newCSconfig>
-
I asume from post#1 you want bluey to work in a stand alone dream, if so....
If you do not intend to share you don't need the cccam.cfg at all, let alone newcs!!
If you have downloaded a version of CCcam, make sure it is enabled for foxtel,
Via the blue button go to, autocamd setup, highlight "provider foxtel" use right vol arrow on remote and "set new camd" value to cccam 2.11 (or your installed version) just exit, change channels and the blue card will kick in.
You may want to do the above on a fresh flash as all the stuffing around with needless cccam config/newcs.xml editing may have corrupted the seamless way the above works.
I have done this with many dm500-s boxes running GEMINI, but never with a cable version.
I use GEMINI V4.1 on all my client decoders too, 2 of which are Mutant 200s boxes, because it has the best menu in my opinion.
KK
Kavakid
Thanks alot it now works as a stand alone unit and have pics ok,
now to go back and try to work out how to share
thanks to everyone for the help to an old dumbass
Cheers
Casull
Not your fault mate, you were totally led astray by the other amazing posts.....
KK.
The Following User Says Thank You to Kavakid For This Useful Post:
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks