It would really depend on what sub you are trying to share !!!!!
If you are trying to make your self a spare card Good luck LOL
Hey there...
I just dusted off my old Elvis programmer..
back from the good ol ghostaman goldies days..
have had sub for a few months, and would like to be able to have it in another room maybe ...
can anyone tell me if my elvis is still ok to use?
i would have to find a serial port, have lost the power cable so will have to plug in a 9volt...
or should i be looking at getting a new programmer?
Look Here -> |
It would really depend on what sub you are trying to share !!!!!
If you are trying to make your self a spare card Good luck LOL
When you do things right, people won't be sure that you have done anything at all
It's hard to keep a good king down...
Lets see, the Fifth, if your Jewish or Anglican thats
"Honor your father and mother"
if your Catholic its
"Though shalt not kill"
Ohh, I see, we're Septic Tanks now..... Amendment.
Sorry B4L couldn't help myslef.
Cheers
Ted (Al)
cheers for the replies..
my next question is..
how can i tell which version programmer it is?
i got it back in 2003ish i think..
it only has a serial port, and a 9volt batt powered.. i ahve lost the power cable though.
Buy a new one then you will know
It's hard to make a come back when I havn't been anywhere
I finally got my head together, now my bodies falling apart.
為什麼不做你被塞滿
just remember if you get another power supply that the center pin is - not + as most are
IF IT DONT WORK USE A BIGGER HAMMER
from memory the elvis is software controlled and will 'boot' in jdm/ludi mode.....
you will need to run the software on a pc to change it to phoenix mode..
yeah i use multiprog v2.10 to run my elvis there are a couple of other sftware that run it but multiprog is the best
IF IT DONT WORK USE A BIGGER HAMMER
dont you need the "Elvis Control Center" ?
later
no you can use instead mulitprog to power on and select phonix or smartmouse settings and for loading gold and silver pic and eeprom files
here is a link for multiprog v2.10
IF IT DONT WORK USE A BIGGER HAMMER
And here is the Elvis control centre if you want it.
EDIT:Thanks puca for a newer version of multiprog.
thanks for all the reply's...
does anyone know how i can plug in my elvis now that everything has gone to usb.
i went to dicksmiths today, and they dont have a serial port to usb converter.
not even sure if the elvis is still alive as i have nothing to plug it into or with.
should i just go to cash converters adn try to find an old dx466 to plug it in with?
Works for me to make a my first Goldie
Don`t need MultiProg (Turned on )to load Pics
but you will need it with FMCard. etc
Mickcc
Last edited by mickcc; 07-07-09 at 07:20 PM.
The version number is written on the underside of the programmer.
These programmers are great! But they're rubbish for cardsharing, as they tend to occasionally drop out of their set mode, and they are only 3.57mhz
Remember that the power jack is -ve center - most home power-packs are +ve center.
If i were you, i would check your mobo manual and see if it has a pin header for a serial connection (add-on/port). If it didn't, you could just buy a PCI-serial card.
Cheers, RHCP.
Last edited by RHCP; 07-07-09 at 07:25 PM.
Democracy: Three wolves and a sheep voting on what's for lunch.
OSIRUS (07-07-09)
Ive been able to do everything with my elvis, mosc, gold, silver, emerald, fun, gamma. firmware 1.6 was better doing fun cards than 1.8
OSIRUS (07-07-09)
BlackDuck (07-07-09)
Bookmarks