I had the same problem. I sent the card back and still no result. Then I cleaned the card and inserted in and out several times and bingo it at worked. Good luck
One other thing to point out if it means anything?
With available networks it shows...
S
STV
SELECT
ERT
With channels like PGM, ANT1 Pacific, ERT World, RFS TV, Fashion TV, etc
G'Day again Cobber,
I've got to ask the obvious. Are you still having trouble with the Humax?
Are you using the correct cable for loading? You need a Null Modem Cable, not a straight through RS 323 Cable.
I realise that you said you used it before, but check it's connections.
We'll see if we can help from there.
Kindest Regards, " the Druid "..........
I'm not sure on the wiring of the cable as a friend did that for me ages ago, but it did work at the time.
My main concern is that I am using the right *.hdf file to patch the humax. If you go to that site that has them it is a little confusing for someone that doesn't do it all the time. The last time I did it was way back when the last official version was released.
Regards,
Glenn
G'Day,
You're right, it is a little confusing. I do hope that I've selected the right ones. Contains both Boot Loader and Firmware. You may need to be more specific with your model identification.
I'm still worried whether you have the correct Null Modem Cable.
If you have a multi meter, is easy to check.
There are some cables that do not have the full 9 wires with crossovers as shown above. They may work, but often cause problems.
Kindest Regards, " The Druid "......
Last edited by ozusenet.info; 27-02-09 at 09:50 PM. Reason: added hdfsmart
Bookmarks