Results 1 to 13 of 13

Thread: newcs not running not matter what i try

  1. #1
    Senior Member

    Join Date
    Jan 2008
    Posts
    2,545
    Thanks
    1,420
    Thanked 530 Times in 290 Posts
    Rep Power
    374
    Reputation
    4678

    Default newcs not running not matter what i try

    Ok im asking for some advice here. I got this hp computer all beefed up ready to roll but newcs is not working it always comes up error. Ive got it working on other computers in my house. Ive tried installing every windows to get it working always error. it goes then error comes up. Sids ran on it so i know the com port is working etc. Do you think its hardware because its defently not software because ive installed xp windows vista and windows 7 and same problem. Works on all the other computers in my house. Anyone know what the go is ?



Look Here ->
  • #2
    Senior Member
    fandtm666's Avatar
    Join Date
    Jan 2008
    Posts
    5,502
    Thanks
    244
    Thanked 990 Times in 465 Posts
    Rep Power
    1189
    Reputation
    40447

    Default

    1: what version
    2:what errors is it giving

  • #3
    Senior Member

    Join Date
    Jan 2008
    Posts
    2,545
    Thanks
    1,420
    Thanked 530 Times in 290 Posts
    Rep Power
    374
    Reputation
    4678

    Default

    ive tried 1.62 and 1.50 and 1.65. well it starts running loading etc ATR then the windows comes up with error just a general error no description and the appilcation closes

  • #4
    Senior Member

    Join Date
    Jan 2008
    Posts
    2,545
    Thanks
    1,420
    Thanked 530 Times in 290 Posts
    Rep Power
    374
    Reputation
    4678

    Default

    same config and all.. and it works on every other computer i got in the house except this hp computer.

  • #5
    Senior Member
    weirdo's Avatar
    Join Date
    Jan 2008
    Posts
    5,458
    Thanks
    4,638
    Thanked 3,135 Times in 1,633 Posts
    Rep Power
    0
    Reputation
    29602

    Default

    What cardreader are you using cobra?
    Maybe it's a compatibility issue with your cardreader or a missing driver?

  • #6
    Senior Member

    Join Date
    Jan 2008
    Posts
    2,545
    Thanks
    1,420
    Thanked 530 Times in 290 Posts
    Rep Power
    374
    Reputation
    4678

    Default

    phoenix from kangmail

  • #7
    Senior Member

    Join Date
    Jan 2008
    Posts
    2,545
    Thanks
    1,420
    Thanked 530 Times in 290 Posts
    Rep Power
    374
    Reputation
    4678

    Default

    but sids was working on this machine....

  • #8
    Senior Member z80's Avatar
    Join Date
    Jan 2008
    Posts
    5,840
    Thanks
    112
    Thanked 77 Times in 48 Posts
    Rep Power
    0
    Reputation
    708

    Default

    you need a core2 duo chipset.


    it's fussy about the chipset it will run on.

  • #9
    Senior Member tagg's Avatar
    Join Date
    Jan 2008
    Location
    In a Tin Can
    Posts
    2,203
    Thanks
    872
    Thanked 378 Times in 221 Posts
    Rep Power
    308
    Reputation
    1897

    Default

    Quote Originally Posted by z80 View Post
    you need a core2 duo chipset.


    it's fussy about the chipset it will run on.
    What Window 7 or Newcs ????


    i think he has his com port configured wrong for newcs


    Tagg

  • #10
    Senior Member

    Join Date
    Jan 2008
    Posts
    2,545
    Thanks
    1,420
    Thanked 530 Times in 290 Posts
    Rep Power
    374
    Reputation
    4678

    Default

    what do you mean ? com port works ok because it reads the card. Then windows comes up with error.. sids gwm worked fine. I tested on other computers and newcs worked fine. It must be something to do with the hardware, as Z80 said maybe. But i dont know, thats why im asking if anyone has had the same thing happen to them
    Last edited by cobra679; 10-02-09 at 12:23 AM.

  • #11
    Member statesmanjeff's Avatar
    Join Date
    Jul 2008
    Location
    Newcastle
    Posts
    391
    Thanks
    95
    Thanked 31 Times in 20 Posts
    Rep Power
    213
    Reputation
    462

    Default

    Had tha same issues.
    Needs to be Core 2 Duo.
    If your using older pc's try Newcs1.20.
    Works oneverything.

  • #12
    Group 1 Owner
    Saintaholic's Avatar
    Join Date
    Jan 2008
    Location
    Sunshine Coast
    Age
    58
    Posts
    1,990
    Thanks
    581
    Thanked 1,632 Times in 742 Posts
    Rep Power
    683
    Reputation
    20978

    Default

    cobra679

    I've had tonnes of probs with different PC's running different apps. Work on some and not others. I'd be concentrating more on the 'HP' side of things first. Go to basics.

    XP, Vista etc will load driver files suitable for the motherboard it is using. You have different motherboards. You'll be using different drivers. So there's a start.

    Try running applications that require your com port. FM400, Cas3, Dial up Modem, STB firmware upload etc. Burn cards at different mhz. Try the GUP.

    If you can do all of these things with the 'HP' then fair enough, start with the Newsc prog.

    Before you try reading a cardreader with Newsc, use a different prog. Haven't tried, but I'd guess FM400 should be able to at least read it?

    'Recently I had a problem trying to reload firmware on my DM500. Would read box OK. Erase, no worries, but trying to load firmware (Image) on. Your kidding me. I persisted, gave up. Tried another PC I have with EXACTLY the same version XP etc (BUT DIFFERENT MOTHERBOARDS) and presto. Immediate success.

    Haven't had the need since to reload. I will however try tweaking the baud rates of my com port next time. Never thought of that at the time.'

    So as frustrating it becomes, hang in there and think clearly. Proove things first and one step at a time. Maybe at the end of the day it will never work on the HP. But keep things basic and dont overlook the obvious clashes you could have.

    good luck
    Cheers, Saintaholic

  • #13
    Senior Member z80's Avatar
    Join Date
    Jan 2008
    Posts
    5,840
    Thanks
    112
    Thanked 77 Times in 48 Posts
    Rep Power
    0
    Reputation
    708

    Default

    Quote Originally Posted by cobra679 View Post
    what do you mean ? com port works ok because it reads the card. Then windows comes up with error.. sids gwm worked fine. I tested on other computers and newcs worked fine. It must be something to do with the hardware, as Z80 said maybe. But i dont know, thats why im asking if anyone has had the same thing happen to them


    I suspect they compiled newcs with a generic core 2 duo chipset rs232 driver or some such.

    It is newcs that has the "bug".


    But...without access to the newcs source code you will need to find hardware that matches the newcs software.

    I suggest to perservere with newcs 1.65. and a core 2 duo main board.

    It shits all over previous versions, it is better than cccam server.

    It has cache working, all other versions do not.. End of story.

  • Bookmarks

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •