$1500
Hi
Want is a reasonable price for a Bosch alarm install on a 4brm house?
Rough estimates please if you can
Look Here -> |
$1500
is that price for install only
Supply and fit, but i'm not in Sydney post same thread in security section instead of cctv - u will get plenty of responses.
yeah that seems about average, with no monitoring / lock in contracts
I'm sure you can find cheaper, but you will be locked into a contract hehe
got a quote for 325 installed
4 PIR and 2 door sensors
325 installed?
With a 10 year contract to cover the installation loss?
that's not even cost price for the gear my friend, be cautious!
325 is the installation cost. Bosch 880 will cost about 280 with 4 PIR ex gst
There's an Old saying,
" you get what you pay for !!!!"
BTW, $ 1500 is a rip off- and $325 is not enough.
$ 1000-$1200 is all it should cost. Its 2-4hrs work on a standard residence.
what is described as a bad installation?
2nd hand gear, poor detector placement some times we refer to these as "christmas tree installations"
Poor Cabling e.t.c i can go on for hours
Typical SSG install,
throw panel in roof(no screws to hold to truss's or something solid, stick detectors on with silicone, double side tape everything, use 7/020 cable, twitch wires together, install pirs facing droughts / windows etc, no tampers, panel tamper 24/7 audible, 10 min siren timer.
The list is large.
What does SSG stand for security tech? To me it sounds like you are describing an ADT install from the dealer days.
Almost, Sig na ture security, I spread their name so it wouldn't give them any free advertising...
I can assure you anyone who ever worked for them will admit the same.
well I had my alarm installed.
Alarm Panel secured in a room of the house. He put capacitors or diodes on the sensors for tamper i believe. Tamper switch on the box, sensors and all sirens. quad shield cabling. Very neat job. Happy with his service
Thanks for the feedback guys
Bookmarks