F&P model GW711 service manual

[omega99]

anybody got a copy of the service manual for a Fischer & Paykel GW711, need to find out what ohms the motor windings are supposed to be?

[timmbo]

Hi Omega,
Not sure about the phase 6 series but the phase 5 motors are 32 ohms per phase.(only have the older manuals)
Hope that helps
Tim

[Fernbay]

[omega99]

Hi Omega,
Not sure about the phase 6 series but the phase 5 motors are 32 ohms per phase.(only have the older manuals)
Hope that helps
Tim

Well I'm getting 32-33ohms on the motor, but keep blowing the 1.5a fuse on the chocolate motor controller PCB. Maybe the water valves, I forgot to check them last time I was there!! Just got a new motor can confirm 32ohms. - so it has to be the water valves of I'm up the creek!

[omega99]

thanks fernbay, i've got all those manuals from stokes.

[Fernbay]

anybody got a copy of the service manual for a Fischer & Paykel GW711, need to find out what ohms the motor windings are supposed to be?

Why would you ask for something that you already have?

thanks fernbay, i've got all those manuals from stokes.

[timmbo]

Too many years of servicing consumer electronics causes memory loss

[Johnno]

Hey Guys, Is the GW711 service manual the same as the GW712 ? If Not, does anyone have one?
My sister just rang me and asked if i could have a quik look at her GW712au.
The Water Level light flashes apparently.

[omega99]

Why would you ask for something that you already have?

they are only "parts" manuals - not service manuals, devil is in the detail!