logging select tv

[puca]

all those with problems you need to read the hsn from your card each card has its own hsn then you need to pm a freindly logger with that hsn then use gamma card 4.4 to load it

[xfiles_2007]

whats 4.4 ?

[fandtm666]

whats 4.4 ?

the version number of a certain program

[BillyGoat]

yes really

same bin + same card = same hsn every re-burn

so you re bin it 100 times using the same bin and card each time it will give the same has every single time

Thanks.

[hoe]

yes really

same bin + same card = same hsn every re-burn

so you re bin it 100 times using the same bin and card each time it will give the same has every single time

i suspect that's a time bomb from the sellers, in case a bin escapes into the wild.......

[shlocker]

the version number of a certain program

I must be way behind, havent seen this version 4.4.
Only have V3.5

[Rocket]

all those with problems you need to read the hsn from your card each card has its own hsn then you need to pm a freindly logger with that hsn then use gamma card 4.4 to load it

If thats the case its not dead HSNs it must be a change in the stream.

[fandtm666]

If thats the case its not dead HSNs it must be a change in the stream.

Select cant change the stream because they allow their customers to use
IRD2 compliant after market receivers , so the stream structure has to remain ird2 standard so the cam's / softcams can read and decipher the commands.

This is unlike austar who now have a modified version of IRD2 which is a proprietary setup due to the fact that all the customers
must use their own decoders and as such can change the stream at will and just flash their units cam with the new algo needed to open the pictures

[weirdo]

Hm, can't be dead HSN's if an emk fixes it

[tagg]

where's this version 4.4. been hiding as i have not come across it, if its just an emk update then the earlier version should work to ??

Tagg

[Twoshots]

does 3.5 allow you to send an emk update string to your gamma?
If so could somebody pls share 3.5 or 4.4

[*fergs*]

4.4 would be good to have..

[kelly75]

would be nice if a really friendly logger could pm me also, thanks

[Jaz808]

I know i am asking alot, but searching isnt going to help
4.4 and the bin would be nice or either would be a start

[otlo]

If anyone could pm me the 4.4 it would be appreciated here to.

[aZz]

When he says 4.4 i think hes refering to the "panda"

[HILLVIEW103]

same here guys if any of you friendly fellas would like to pass it on that would be nice


Tagg

me too i have an open box 810

[tagg]

When he says 4.4 i think hes refering to the "panda"

Who is ?

I have tried using Ird_logextract to if that work but it seem to get a tcp socket error all the time and no data ??


Tagg

[Twoshots]

When he says 4.4 i think hes refering to the "panda"

panda only loads the bin file

[puca]

ok i seem to have created some confusion the program i was refering to is also known as gup 4.4 there is a gup 3.5 floating around i have been asked not to upload the 4.4 have been told 3.5 is better and does the same job
cheers puca

ok for those who cant find 3.5 here it is