Also and why can't I telnet to the box like I can my laptop running newcs?
Leroy
Since I can't get my phoenix to work on my serial port I thought I'd try to use the internal reader. Buggered if I can get it to read my Aurora goldie. It works fine in my Strong. Can anyone see anything wrong with my newcs.xml file?
<?xml version="1.0"?>
<!--
<newCSconfig>
<readers name="Card Readers">
<device>
<name>lower</name>
<type>Sci</type>
<node>/dev/sci0</node>
<export>yes</export>
<enabled>yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<PTShandshake>no</PTShandshake>
<crypto-special>no</crypto-special>
<carddetect>yes</carddetect>
<newcamd_port>6666</newcamd_port>
<priority>round</priority>
</device>
</readers>
<cache>
<emm>10</emm>
<ecm>10</ecm>
</cache>
<debug>
<level>normal</level>
<type>init</type>
<output>console,tcp</output>
<console_options>normal,init</console_options>
<tcp_port>1001</tcp_port>
<tcp_options>normal,init</tcp_options>
</debug>
<newcamdserver>
<enabled>yes</enabled>
<name>bla</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<user>
<name>Local</name>
<password>Local</password>
<au>on</au>
</user>
<user>
<name>User1</name>
<password>Pass1</password>
<au>on</au>
</user>
</newcamdserver>
</newCSconfig>
Thanks........Leroy
Look Here -> |
Also and why can't I telnet to the box like I can my laptop running newcs?
Leroy
I think what you have looks OK, but I believe will you also need the CCcam config file (Assuming you are using CCcam)
I have pasted the newcs.xml config file as well as the CCcam config file that I have used in the past.
Not sure if a Goldie Irdeto card works in the internal slot. An NDS card works with no probs. Good luck.
------------- newcs.xml ------------------
<newCSconfig>
<readers name="Phoenix">
<device>
<name>external jaycar mk2</name>
<type>phoenix</type>
<node>/dev/tts/0</node>
<mhz>600</mhz>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<crypto-special>No</crypto-special>
<PTShandshake>No</PTShandshake>
<carddetect>no</carddetect>
<newcamd_port>7777</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>fifo</priority>
</device>
<device>
<name>Upper Cardreader</name>
<type>sci</type>
<mhz>600</mhz>
<node>/dev/sci1</node>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<crypto-special>No</crypto-special>
<PTShandshake>No</PTShandshake>
<carddetect>no</carddetect>
<newcamd_port>8888</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>fifo</priority>
</device>
<device>
<name>Lower Cardreader</name>
<type>sci</type>
<mhz>600</mhz>
<node>/dev/sci0</node>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<crypto-special>No</crypto-special>
<PTShandshake>No</PTShandshake>
<carddetect>no</carddetect>
<newcamd_port>9999</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>fifo</priority>
</device>
</readers>
<cache>
<emm>20</emm>
<ecm>-1</ecm>
</cache>
<debug>
<level>normal</level>
<type>init</type>
<output>console,tcp</output>
<console_options>normal,init</console_options>
<tcp_port>3001</tcp_port>
<tcp_options>normal,init</tcp_options>
</debug>
<newcamdserver>
<enabled>Yes</enabled>
<name>newcs</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<user>
<name>Local</name>
<password>Local</password>
<au>on</au>
<sidoverride>on</sidoverride>
</user>
<user>
<name>user8888</name>
<password>pass8888</password>
<au>on</au>
<sidoverride>off</sidoverride>
</user>
<user>
<name>user9999</name>
<password>pass9999</password>
<au>on</au>
<sidoverride>off</sidoverride>
</user>
<user>
<name>user7777</name>
<password>pass7777</password>
<au>on</au>
<sidoverride>off</sidoverride>
</user>
</newcamdserver>
</newCSconfig>
----------------- CCcam.cfg -----------------
N: localhost 7777 Local Local 01 02 03 04 05 06 07 08 09 10 11 12 13 14
N: localhost 9999 Local Local 01 02 03 04 05 06 07 08 09 10 11 12 13 14
----------------------------------------------
the n line's in cccam also.
Leroy
I had Aurora running on a goldy no probs for a long time on a DM500. Even had a whitey on the Phoenix out the back.
But hey if you can drop the EMK and PKs in a file its easier. Dump the goldy and use the files laying around this forum. There was a link to softcam files for dm500 posted here a few weeks ago.
Here you go
Chief
i've loaded this image 'Dm500s SERVER IMAGE-NDSandAustar using internal card slot newcs120-cccam120-lnb11300 inc aljazeera'
One would think this would work if i stick the goldie in the slot? It had keys hence so i deleted them and stuck the goldie in......no pics.
Should there be any messages on the screen like 'initializing card' or 'non valid card' etc like what I get on my Strong?
Leroy
I have the same problem. I used z80's image setup for internal and external slot.. Tried both areas but did not work. I could not get the external reader going and I'm going to ask for an exchange on my unit.
And if it does not flash with all settings then flashwizard it with this
Hi i have only hade a dreambox 500s for a week so am completely lost
I followed all of the above advice and could not get it to work untill i change the line <carddetect>no</carddetect>
to <carddetect>yes</carddetect>
Now when i go to card info it try to read tts/0
butwhen it gets to normal reset onnode /dev/tts/0
i get reset failed
any idea/s
<newCSconfig>
-
- <readers name="Phoenix">
-
- <device>
<name>external jaycar mk2</name>
<type>phoenix</type>
<node>/dev/tts/0</node>
<mhz>356</mhz>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<crypto-special>No</crypto-special>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>52000</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
cheers
coxie
Just a quick update. ok well it looks like you can't use a goldie in a dm500! If you browse to cccam port 16001 and click on entitlements I can see my suspended select card details but not a goldie's. It says that no or unknown card is inserted when the goldie is in!
Leroy
I thought running a goldie in the DM500 internal slot damages the box? I haven't tried this but remember reading it somewhere on the 'old forum'.
i have a one working just fine in the slot on 500
and i have tested over night with both these images
z80_PLI iolite- internal and external cards
dm500s Server-internal and external cards-gamma and Nds
just a quick question
are you using cccam 2.0 or earlier as the newer ones don't work for me and that could be the issue
Maybe its some clones that have a problem.. Cause from what I've read and own experience its common
Bookmarks