pheggie (27-02-10)
Does anyone know if this is possible with a card from a Cable IQ ?
Mine recognises the card as NDS and the serial number but channels still come up as scrambled
yes the cable fox cards will work as long as you keep paying for foxtel
orange or blue
bob_the_builder (23-04-10),crannymac (21-04-10)
I have posted this question recently in this thread but got no answers.
Have any users of the Strong 4910 used self-powered USB 2.5" drives and found the drive does not power up for recording?
I have used 2.5" Western Digital 320GB & 500GB self powered drives with the Stong 4900 over the last 6 mths with no issues at all.
So I would I be correct in assuming the Strong 4910 to be the same?
Or is this a problem only with the Mediastar 9100?
Apprececiate any feedback as i'm trying to decide for a friend which decoder to go for.
I've only used 2.5" drives with the Mediastar and not had an issue.
Cheers,
Leroy
XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS
I use 2 Lacie Rikiki 250 gb 2.5 usb drives in each of my 4910's and they dont miss a beat. Very pleased!!
still getting scrambled channels. Does it take long for the card to initialise? Thanks.. Have just upgraded to Platinum and paid my dosh so no dramas there
did you put the box serial in the Strong? I don't have cable but sometimes need to put my card back in the pox box then move it back to the Strong
Last edited by pheggie; 21-04-10 at 10:20 PM.
The strong box picked up the serial number without any input from me in fact had even dropped the last number off.. Maybe I should reinsert the card and input the serial manually
Hey Got it done.. Excellento thanks Pheggie & accessantennas
the 4910 is working rock solid with foxtel HD channels on orange card
smit cams work rock solid with optus aurora and foxtel orange for some reason
SCM cams arent working aswell for some reason
no glitching when recording foxtel and watching foxtel - had people complain on other Twin HD models
i dont like smit cams - but they are working rock solid in 4910
stop it Hal, you'll go blind.
XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS
we recommend using a western digital 2.5" or 3.5" as they are a lot better quality ...
never had an issue with a WD for using PVR
if you havent bought a HDD yet - for reliability i would get a WD
How's everyone going with the HD channels re sound, I only get sound on the sport channels, the HD movies have no sound. Do I need a toslink cable and a 5.1 surround sound system?
Update, did a rescan and all working . also found that if I re-order the channels using NDFedit I have to do a blind scan to get the HD sound working again.
Last edited by ags_; 29-04-10 at 09:23 AM. Reason: found a fix
Please I just bougth strong srt 4910,but there is no rj45 port,how can I connect it to internet?
Have another look as there is an ethernet port. I don't know that you can do anything useful though once it's connected.
Leroy
XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS
my 4910 is middle east version,so it has no RJ45 port,the question is:how can I connect to internet since it has cccam and newcamd provision inside?
Bookmarks