unlock ATR

[deka]

I have a white card, previously not a problem because already contains ird2 and then there is a problem when the update program, after I test with emk-3.5 is the message ATR = 3B B2 11 00 10 80 00 02 locked, can help me to solve this problem

[Fernbay]

Locked just means that it's ready to accept the OS/Bin file

[puca]

no not really fernbay i bought 3 cards recently from here and all have the same ATR = 3B B2 11 00 10 80 00 02 and no matter what i do i can not unlock it to load a bin file useing gup or any other program maybe its just me and time to sell all this crap

[Fernbay]

I haven't played with these for near on six months, but it's how I remember it. I would have to do some searching to confirm the ATR of a locked sellers or gamma but I've got other things on the agenda today

[fasulye]

I find the original version of Panda (i.e. not loadme2.exe) works best in this situation

[STI02]

I have a card with the same ATR. I found loadme.exe and there is a text file with it (see below) referring to sending some commands to the card. My question is how to send these commands and which prog to do it with?

" How to load the ORIGINAL OS onto a gammacard I assume this means a blank gamma with no previous OS loaded.

Basicly I'm told that you need to put the card into EEPROM mode.
You do this by sending these commands to the card.

Send this first: 01 02 DE 00 00
Then send: 01 02 DF 00 00 08 D0 00 6D 98 F3 EE 79 6C

This should put the card into EEPROM mode and allow you to load the .bin file with loadme.exe file.

The problem now seems to be locating the OS.

I accept no responsibility if this kills your card - Do this at your OWN RISK!"

p.s. I tried FM Card but I get an error when I try to connect.

I find the original version of Panda (i.e. not loadme2.exe) works best in this situation

[mickc]

panda puts the card into eeprom mode in auto when loading the bin
gup needs the card to be put into eeprom mode first
so if card is locked panda should fix this with a bin load
or gup may fix after you have converted the bin file

[shlocker]

I have a white card, previously not a problem because already contains ird2 and then there is a problem when the update program, after I test with emk-3.5 is the message ATR = 3B B2 11 00 10 80 00 02 locked, can help me to solve this problem

I had the same problem and took me months to solve.
First question to you what programmer are you using?
I use infinity unlimited USB.

All I did was change the byte delay in GUP form zero to 10. (byte delay is bottom of GUP)
This enabled the bin/OS file to write to the card (when on zero I got error all the time)
Hope this helps you.

[sublib25]

no not really fernbay i bought 3 cards recently from here and all have the same ATR = 3B B2 11 00 10 80 00 02 and no matter what i do i can not unlock it to load a bin file useing gup or any other program maybe its just me and time to sell all this crap

Did you have any joy unlocking your gammas?
Tried all I know, just returns Emm not Successful.
3B B2 11 00 10 80 00 02 Locked.

[INFO]

[fandtm666]

panda + 3.5mhz + bin file = working card

[INFO]

Have seen people getting ripped off tho with white gold/silver cards being programed to have the same ATR as the sellers cards when in a LOCKED state

[shlocker]

I am thinking that these locked cards are NOT seller cards.
They are original Gamma OS (ones used with gamma loader)
I have one where I deliberately programed it with a gamma file (fake greek nova) which locks the card and gives 00 10 80 00 02 locked.
I did this to experiment with loading a Aussie bin file on this gamma card with GUP.
Guess what it didnt work.
There are unlockers (about 7 of them) which work on some cards, not all. (claimed to be 70% success rate) Unfortunately mine is still locked so no gamma file can be loaded.

[sublib25]

Spot on shlocker, tried the same with no go.
Keeps returning Emm unsucessful.