this is the latest map r15.1, built 27.10.08 :
this is where you will find the latest software :
look here as well :
Ok so I have:
NavNGo iGO8
8.0.0.41506
Jun 3 2008
Running on an HTC Diamond beautifully!
I have map:
Australia R14
[Sensis 080215]
with
basemap 2007.07
Data Source NIMA VMAP0 [080117]
SO my question is this...Is there a later map available for this and should I upgrade to 8.3 if it is working well?
If so would someone be kind enough to send me a link to the aforementioned in here?
Cheers guys,
Matt
Look Here -> |
this is the latest map r15.1, built 27.10.08 :
this is where you will find the latest software :
look here as well :
The latest R1 iGO8 is 8.0.0.71609 Jan 09
awesoem guys ...thanks!
Is there a link for downloading this version??
If you can't run with the DOGS, Stay on the Porch
UPDATE
Nav N Go iGO8 v8.0.0.71609 R1 (Jan 8 2009)
Download:
Pass: srppcwarez
Mirror:
Pass: srppcwarez
Navigation software(patched) only - with empty Content folder
Installation Instructions
1. Unrar the content of the archive onto your SD Card or device's internal flash drive and copy missing (Lang, Voice, Map...) files into the Content folder
2. Open SYS.TXT file located in your IGO8 directory and add modify it as needed (for users running iGO from SD Card no modification's needed)
3. Launch the application either from the File Explorer or create a Program Shortcut (using i.e. Totalcmd CE)
Enjoy,
SR
Kevaclone (03-06-09)
does this support WVGA 480x800 resolution?
I am guessing that the map posted here is not compatible with the Nav N Go iGO 8 v8.3.2.87762 (April 27 2009) - R3 PDA version
Hi, check this one:
Mar 2009 - Version 8.3.2.80621
Mar 2009 - 8.0.0.716609
There is more stuff. Version 10 data.zip with all resolutions
or you can use 240x400 and put this
[rawdisplay]
class="portrait" ; not sure 100% about this one
highres=1
screen_x=480
screen_y=800
in your sys.txt file
Naviextras dot com talks about 8.0.0.88902 (May 6 2009) for PDA
I've seen somewhere May 2009 - 8.3.2.91972 and someone
mentioned 8.3.3 version, and there is 8.4 Amigo version.
Regards ojejoe
I am using iGo 8.3.2.91972, Australia map 2008.Q3(081205) and base map 2007.07. Its running of the SD card in my Asus 636 PDA. All works as expected except there is no voice commands from Kate or her US friend. TTS or otherwise, any clues as too where I've gone wrong.!
most probably you are missing sound files for the one you are looking for......
do you have the necessary files in a 'tts_loq' folder in the root directory ?
Are the POI files and SpeedCam files intercompatible between v83 maps and v80 maps for iGO? It's well known that you can NOT use v83 maps on v80 of NavnGo, and vice versa, but how about POI and speedcam files?
Bookmarks