Can someone point me in the right direction as to what could be the issue
happy to provide more info.
Just need to know where to start.
thanks
Hello All,
Had some time to play around with my Gamma again that had the pub gam before it went pear shaped.
Opened up gamma loader and tried to clean card now getting
This is not a Gammacard.
Remember there was something in the forum to try but since the crash unable to find anyhing.
Tripa
Look Here -> |
Can someone point me in the right direction as to what could be the issue
happy to provide more info.
Just need to know where to start.
thanks
I know there are different versions of gamma loader V1 V1.1 etc
try another version as I think they suit different o/s versions on the card
Just wanted to make sure your card is still alive.
As your card seems ok the only thing I believe is happening the card doesn't accept the cleaning command. It can be due to communication problems. Try different settings 3.57 and 6 Mhz for your programmer.
From my memory gamma loader will send the cleaning command to the card and then will check if the ATR returned has gamma os v 1.x. Your card definetely doesn't understand the command.
thanks fromaron, looks like might be my Jaycar programmer just tried to test with a goldie and no dice, did a hardware check in icprog and there is no data in. Need to try fix this now Will try the gamma on a Mastercard 2 programmer see if I can clean it.
tripa3
make sure you are using a straight thru cable
Bookmarks