what Cam are you trying it in ??
does the card show up / read details when its in your cam ??
has anyone managed to get a select card working with ccam with the original image (as per group buy)?
i can't get it to work in irdeto cam, only in slot using newcs and Mgcamd
the problem i am getting with this combo is, it freezes about every 20 or so minutes and then restart again sometimes takes 30 seconds other times up to a couple of minutes.
Look Here -> |
what Cam are you trying it in ??
does the card show up / read details when its in your cam ??
DM500s & Relook 400S Owner.. was now =
copy of ATV Flash for ATV Gen1
WTD : Sniper Elite for Wii - with Rifle if possible
RIP gw1, "LIFE MEMBER" u will be sadly missed
tried both irdeto cam rev 1 (901633) and a power cam pro
neither get emm hits etc
state 0000
emm 0000
sub state 0
both these cams work fine in strong box
I haven't got a Select card but try with Scam harryt
I would of thought that Irdeto cam was a little old. Many moons ago before the big crash of '07 there was a thread on what cam/box combo's worked with Select. I just tried mine in a similar aged cam and it wasn't bringing up pics but did when put in the slot.
Have you tried the latest Cccam 2.1.1? I tried this the other night and got pics with a DM500 (yeh yeh I know not the same box).
Leroy
XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS
i tried the new neumo image ver.3 and the new fantasy team image with no luck so reverted back to the original image from the group buy,
seems to be the only image i can get it to sort of work.
i don't particularly want to go to a enigma image and loose the twin tuner function.
leroy works great in the dm500 even copied the config files across and still no luck, i'll play around with it a bit more when i get time.
harryt (12-06-09)
DM500s & Relook 400S Owner.. was now =
copy of ATV Flash for ATV Gen1
WTD : Sniper Elite for Wii - with Rifle if possible
RIP gw1, "LIFE MEMBER" u will be sadly missed
[QUOTE=vk6xlr;183597]Add DVB API: 2 to your CCcam.cfg. Fixes it good and proper
/QUOTE]
OK .. straigh out of the box with CCcam 1.7.1 & the DVB API: 2 line added & seems to be working atm..
DM500s & Relook 400S Owner.. was now =
copy of ATV Flash for ATV Gen1
WTD : Sniper Elite for Wii - with Rifle if possible
RIP gw1, "LIFE MEMBER" u will be sadly missed
Yes I read in another post about the DVB API: line BUT as you pointed out..
Not very informative at all..
I actually tried a few variations of the same line but obviously didnt quite have it right..
Give it a few days & I will swap it all round.
get the only part of the Eagles to work (Blue & Gold) running in the 400 out so I can Dream all round
DM500s & Relook 400S Owner.. was now =
copy of ATV Flash for ATV Gen1
WTD : Sniper Elite for Wii - with Rifle if possible
RIP gw1, "LIFE MEMBER" u will be sadly missed
I also tried a few variations and didnt work it out and msg a member from here who gave me the correct line and i finally have pictures without freezing with the a****a autorol keys, as for the bluey havent tried that yet, Fergs are you using a cam for it or is it in the card slot?
DM500s & Relook 400S Owner.. was now =
copy of ATV Flash for ATV Gen1
WTD : Sniper Elite for Wii - with Rifle if possible
RIP gw1, "LIFE MEMBER" u will be sadly missed
You're correct - CCcam 2.0.0 is the last version that will work with Neumo & DGS images. The consensus on seems to be that 1.7.1 is the most stable. I had tried CCcam versions above 2.0.0 without success, but hadn't tried 2.0.0 before. I've just changed to it & will check it's stability & report back.
My setup is, 200S CCcam 2.0.11 (PLI Jade) with blue card, DM600 with CCcam 2.0.11 (PLI Jade), 400S CCcam 1.7.1 & capmtserver. This arrangement has been stable for months, & will provide EMM updates as well (don't have to put the card back in the provider box at all).
After spending my Saturday and Sunday reflashing and tweaking with the CCcam.cfg, I manage to get picture with a subscription irdeto v5 card select by using the Relook Support image.
I had to used the CCcam + Newcs emu and added N line and DVB API: 2 to the config file.
I tried running CCcam 1.7.1 and 2.0.0 alone but no go. Both needs to run with Newcs.
I tried this with Fantacy and Neumo image and they are ok too. The box needs to run as a card server and client to its self .... I know as others in the forum have stated before - but I need to try and see it myself.
Bookmarks