switch for fixed c-band and ku-band dish with dm500s

[crappymate]

hi guys,
i got one 2.3 metre mesh c-band dish fixed to asiasat3 and 1 ku band 90cm dish pointing to optusc1.
my receiver is dreambox 500s.
my challenge is to input the signal from 2 lnb/dish to the receiver same time.

right now i have been moving the cable to different lnb to watch different dish.
i heard about diseqc switch is needed for this purpose.i am new to this kind of switch.any guide would be useful.
what sort of switch do i need to buy?
and will that work with my dreambox receiver,
when i use the switch ,if i change channels in my dreambox receiver,will it be like,if i go to optusc1 channels i will get singal from optusc1 channel and if i select asiasat3 channels i will get asiasat3 channels.
how does it work?
thanks

[cwispy]

All you need is a decent quality DiSEqC switch like this and you then turn on the appropriate settings in the dream to switch between the dishes.

You should be able to find one from a local supplier or even a cheaper brand.

[big mick000]

already been answered on vetrun.com, ramsharan.

[crappymate]

thanks all guys.
i have ordered a 4 way diseqc switvch.i should have it within 1 week.
i will try to use to once i get it and will update u how i go.
thanks

[jonc]

thanks all guys.
i have ordered a 4 way diseqc switvch.i should have it within 1 week.
i will try to use to once i get it and will update u how i go.
thanks

Let us put it this way, if it does not work it is not the fault of the diseqc
Try a 32way multiswitch, these are fun but some images just do it better than others.