Tutorial : Tomtom7.910 for WinCE4.2 PNA

[Downunder35m]

Here is a simple tutorial on how to install the latest Tomtom version on your PNA running WinCE4.2 ,all credits go to demonfatal .
I assume you will use a SD card for installation - make a proper backup first or use a new card for it!

1. Download this release of tomtom 7.450.9030

2. Download this file :

3. Install the content of "Navigator.rar" to your SD card.
After that you should have a folder named "navigator" on it!

4. Install last maps v830.2290...
Password for download : demonfatal
The link says offline - thats for security only ,just klick onto the foldersymbol and download!

META for this map :
; Australia_830_2290
76 EE 1B F4 91 66 FD 89 8D F1 3E 4B 6E 11 62 D3 Australia-40.meta

5. Put SD cardinto your device and run "TTN7BOT.EXE"
Tomtom 7 is loading.... ,next close it or do a soft reset!

4. Use this for this map
Password : demonfatal
How to use Keygen :
4.1 Extract the files from keygen.rar to your had disk
4.2 Now copy .meta from your map directory to "insert_meta_from_Map_here" in the "Eaysyusetools..." directory
4.3 Using "Notepad" open the file "ttnavigator.bif" located in your "navigator" folder on your SD card.
4.4 Copy the number next to "DeviceUniqueID=" into the file "DeviceID.txt" in the "Easyusetools..." folder on your hard disk
4.5 Save and close the file "DeviceID.txt" - close the other window with the "ttnavigator.bif" too
4.5 Start "RunMeforDCT.bat" in "Easyusetools..." folder
4.6 Choose number 2 and press "enter"
4.7 Then choose number 1 and press "enter"
4.8 Close the window as the keygen is finnished

5. Go to folder "insert_meta_from_Map_here" in the "Eaysyusetools..." directory and copy the new file .meta.dct that was created into your map folder on the SD card

6. Run "TTN7BOT.EXE" again in the "navigator" folder and configue it - but DO NOT FIX SATELLITES!!

7. Go to menu 2 of 3 and "prepare route" , choose any address and coose "fasted route" , push "done"
7.1 Planned route loading next push "done"
7.2 Go to "Exitapplication"

8. Extract files from #1 (WINCE.4.2.RAR) to your SD card
You should now have thre folders on your SD card : "navigator" , "TT7.WCE.4.2" and you map folder

9. Make a new folder in "TT7.WCE.4.2" and name it "MapSettings" ,copy "mapsetting.cfg" from the folder "TT7.WCE.4.2" to new folder ("MapSettings")

10. Download and copy "NOTE_PRJ.DLL" into "TT7.WCE.4.2" folder

11. Download and extract it to "TT7.WCE.4.2" folder.
Password : demonfatal

12. Open "TT7 Navigator.mscr" with Notepad and do the following changes :
12.1 Replace the map directory in there (France_725.1871) with the folder name of your map e.g. if you map is in "Australia" name it "Australia".
You have to this with both entries!!

13. Good ,you can now delete the folder "navigator" on your SD card (not a vital step to make it work)

14. You are ready to use Tomtom 7 , but make sure you always run "TT7Navigator.EXE" to start !!

15. To use the latest version of Tomtom download and replace "TomTom Navigator.exe" & "data.chk" with on your SD card with the files in that archive!

16. You need use the keygen again for create a new ***.dct file to use your map.
Choose Option 1 > then Option 1 again and copy the new ***.dct in your map folder.

Again all credits to demonfatal