sounds like a memory problem
try changing the ram
Ok Got a PC here and have googled with not much luck
I have donloaded various programs and programs from USB stick. When I goto setup each particular install I get various corruption errors (CRC, Bad file etc) Not copying from CD\DVD, these are files run from HD
Done a memtest then changed ram
Completed an overnight Burnin Test
Changed power supply
Changed SATA cable
Fresh install of XP
Nothing changed the problem
Only thing left is HD/CPU/Motherboard
Im pointing towards Motherboard. System is less than 8 months old running Gigabyte MB Kingston RAM 1gb Seagate
Anyone had a similar problem?
cheers
Look Here -> |
sounds like a memory problem
try changing the ram
yeah did mate...said in post b4
Since i wrote the post I thought Id copy these files to CD and try installing Voila
they install but where some apps still require extraction i get errors so it almost says something with I/O of Hard disc. Running Seaget tools as I write
You could give a go to see what your HD SMART status is, but the Seagate tools probably does a similar thing.
ok done a scan with seagate . Nothing found. Havent got another SATA handy. Will try an ide
sounds as though the source files from usb stick are corrupted do a copy but verify may have to be in dos window
Bookmarks