May I ask the obvious first,
In the "Card Type" settings, did you un-select the "GGold" (for Ghost Gold Cards)
& select the "GS/E/F" (for Ghost Silver / Emerald / Fun)
Cheers
I have a phoenix infinity usb, It will not read or write a silver or funcard using LMedit it reads and writes a Goldie no worries, can anyone give a clue how to fix the problem......i use windows XP.......thank you.
Look Here -> |
May I ask the obvious first,
In the "Card Type" settings, did you un-select the "GGold" (for Ghost Gold Cards)
& select the "GS/E/F" (for Ghost Silver / Emerald / Fun)
Cheers
Last edited by OSIRUS; 12-07-09 at 08:14 AM.
Become a Premium Member and support the Austech Forum
yes its on the right settings
If you download phsmtest from the phoenix infinity usb site, it will test your configuration to the infinity reader and the card.
PHSMTest shows you the information off the card when you click test, if this test works and LMEdit still doesnt work then its the settings in LMedit.
I put my infinity usb into Phoenix mode with 6MHz clock speed and it talks to my FunCard nicely.
thanks mate tried the phsmt..it says test suceeded on comport 3...down the bottom it says status...connected then it says card not inserted, its got me stuffed the card is in and its a working silver card, i'm on Phoenix mode with 6MHz, all i'm trying to do is put the keys on a fun card and it dosn't want to know about it, it can put the keys on a goldie no worries, i assume its the same keys for silver fun goldie???
.ocx files installed for LMEdit ?
on the fun Card did you install files for the internal & external Eeprom ?
Last edited by OSIRUS; 12-07-09 at 08:30 PM.
Become a Premium Member and support the Austech Forum
I start PHSMTest without the card in the Infinity, set the comm port and then click the Open. It should say it has detected a reader.
Then put the card into the reader, the Test button should then enable.
Click the Test button and the window should display info about your card.
If this all works then your Infinity is working and talking to the card.
Have you loaded all the files onto the card like OSIRUS suggested?
I have only used GhostFun on my FunCard and LMedit and GGedit both worked once I got the settings right using phsmtest.
I love my Cas 3 Plus, everything is effortless,
Become a Premium Member and support the Austech Forum
Check that you have the same settings in LMedit as in the Infinity software now that you know you can talk to the card with phsmtest.
ie Phoenix mode, 6MHz and comm port.
well its got me beat, i did the test again with phsmtest. and this time it was good,, it read the fun, silver,and goldie, went back to LMedit, same result will read and write Goldie but dosn't want to know about silver or fun card, i think we have exhausted all avenues, i've got a cas3plus coming so i hope that will work properly..........once again thanks for your help, if you come up with any other ideas lets know. regards jim.
Just another thought,
have you tried to Program & Write to, some new cards (to rule out faulty cards) ?
can you read the Silver & Fun Cards in other programs such as Card Explorer, & FMCard ?
If you can get an ATR, & Version No, & a few other details it may mean the Ghost Files are all programmed correctly,
have you got another Phoenix programmer laying around to try LMEdit ?
I have a USB ($45 ?) Phoenix Programmer from satronics that I can use just for writing the Details to the card, (after programming the Pic & Eeprom on another programmer)
& it works with LMEdit for Gold, Silver, Emerald, & Fun Cards, just to write the details to the Card,
just some more ideas, (it is strange the Gold works & the others don't)
Cheers
Last edited by OSIRUS; 13-07-09 at 10:02 PM.
Become a Premium Member and support the Austech Forum
It reads cards in Gamma 4.1 program i can put the keys on a goldie using ghost gold editor it will program a goldie with hex etc, the silver card i have is a working card no probs, it just wont read it, same as fun card, i've had a guts full of the mongrel and i have just put on Ebay, i have got a Cas3 plus coming that i won on Ebay, i already have a cas3 plus but it shit itself, i'm not having a good run at the moment...thanks for you thoughts i'll let you know if things work out with the cas....Jim.
OSIRUS (14-07-09)
Bookmarks