Results 1 to 14 of 14

Thread: phoenix infinity usb

  1. #1
    Senior Member HILLVIEW103's Avatar
    Join Date
    Mar 2008
    Posts
    777
    Thanks
    127
    Thanked 146 Times in 87 Posts
    Rep Power
    258
    Reputation
    1887

    Default phoenix infinity usb

    I have a phoenix infinity usb, It will not read or write a silver or funcard using LMedit it reads and writes a Goldie no worries, can anyone give a clue how to fix the problem......i use windows XP.......thank you.



Look Here ->
  • #2
    Premium Member
    OSIRUS's Avatar
    Join Date
    Jul 2008
    Location
    NSW
    Posts
    3,592
    Thanks
    10,571
    Thanked 2,467 Times in 958 Posts
    Rep Power
    1071
    Reputation
    38001

    Default

    May I ask the obvious first,

    In the "Card Type" settings, did you un-select the "GGold" (for Ghost Gold Cards)

    & select the "GS/E/F" (for Ghost Silver / Emerald / Fun)

    Cheers
    Last edited by OSIRUS; 12-07-09 at 08:14 AM.
    Become a Premium Member and support the Austech Forum

  • #3
    Senior Member HILLVIEW103's Avatar
    Join Date
    Mar 2008
    Posts
    777
    Thanks
    127
    Thanked 146 Times in 87 Posts
    Rep Power
    258
    Reputation
    1887

    Default

    yes its on the right settings

  • #4
    Junior Member
    Join Date
    Jul 2008
    Age
    56
    Posts
    45
    Thanks
    1
    Thanked 0 Times in 0 Posts
    Rep Power
    193
    Reputation
    10

    Default

    If you download phsmtest from the phoenix infinity usb site, it will test your configuration to the infinity reader and the card.
    PHSMTest shows you the information off the card when you click test, if this test works and LMEdit still doesnt work then its the settings in LMedit.



    I put my infinity usb into Phoenix mode with 6MHz clock speed and it talks to my FunCard nicely.

  • #5
    Senior Member HILLVIEW103's Avatar
    Join Date
    Mar 2008
    Posts
    777
    Thanks
    127
    Thanked 146 Times in 87 Posts
    Rep Power
    258
    Reputation
    1887

    Default

    thanks mate tried the phsmt..it says test suceeded on comport 3...down the bottom it says status...connected then it says card not inserted, its got me stuffed the card is in and its a working silver card, i'm on Phoenix mode with 6MHz, all i'm trying to do is put the keys on a fun card and it dosn't want to know about it, it can put the keys on a goldie no worries, i assume its the same keys for silver fun goldie???

  • #6
    Premium Member
    OSIRUS's Avatar
    Join Date
    Jul 2008
    Location
    NSW
    Posts
    3,592
    Thanks
    10,571
    Thanked 2,467 Times in 958 Posts
    Rep Power
    1071
    Reputation
    38001

    Default

    .ocx files installed for LMEdit ?

    on the fun Card did you install files for the internal & external Eeprom ?
    Last edited by OSIRUS; 12-07-09 at 08:30 PM.
    Become a Premium Member and support the Austech Forum

  • #7
    Junior Member
    Join Date
    Jul 2008
    Age
    56
    Posts
    45
    Thanks
    1
    Thanked 0 Times in 0 Posts
    Rep Power
    193
    Reputation
    10

    Default

    I start PHSMTest without the card in the Infinity, set the comm port and then click the Open. It should say it has detected a reader.

    Then put the card into the reader, the Test button should then enable.
    Click the Test button and the window should display info about your card.
    If this all works then your Infinity is working and talking to the card.

    Have you loaded all the files onto the card like OSIRUS suggested?

    I have only used GhostFun on my FunCard and LMedit and GGedit both worked once I got the settings right using phsmtest.

  • #8
    Senior Member HILLVIEW103's Avatar
    Join Date
    Mar 2008
    Posts
    777
    Thanks
    127
    Thanked 146 Times in 87 Posts
    Rep Power
    258
    Reputation
    1887

    Default infinity

    Quote Originally Posted by OSIRUS View Post
    .ocx files installed for LMEdit ?

    on the fun Card did you install files for the internal & external Eeprom ?
    thanks osirus....mate yes the fun card has the right files.......i assume the ocx files are sweet otherwise it wouldn't do the Goldie, i have just bought another cas3 plus....i hope it all works on that

  • #9
    Premium Member
    OSIRUS's Avatar
    Join Date
    Jul 2008
    Location
    NSW
    Posts
    3,592
    Thanks
    10,571
    Thanked 2,467 Times in 958 Posts
    Rep Power
    1071
    Reputation
    38001

    Default

    I love my Cas 3 Plus, everything is effortless,
    Become a Premium Member and support the Austech Forum

  • #10
    Senior Member HILLVIEW103's Avatar
    Join Date
    Mar 2008
    Posts
    777
    Thanks
    127
    Thanked 146 Times in 87 Posts
    Rep Power
    258
    Reputation
    1887

    Default infinity

    Quote Originally Posted by tokalaNZ View Post
    I start PHSMTest without the card in the Infinity, set the comm port and then click the Open. It should say it has detected a reader.

    Then put the card into the reader, the Test button should then enable.
    Click the Test button and the window should display info about your card.
    If this all works then your Infinity is working and talking to the card.

    Have you loaded all the files onto the card like OSIRUS suggested?

    I have only used GhostFun on my FunCard and LMedit and GGedit both worked once I got the settings right using phsmtest.
    thanks again, must be getting close was able to do the test, but the result said failed with both the silver and fun card

  • #11
    Junior Member
    Join Date
    Jul 2008
    Age
    56
    Posts
    45
    Thanks
    1
    Thanked 0 Times in 0 Posts
    Rep Power
    193
    Reputation
    10

    Default

    Check that you have the same settings in LMedit as in the Infinity software now that you know you can talk to the card with phsmtest.
    ie Phoenix mode, 6MHz and comm port.

  • #12
    Senior Member HILLVIEW103's Avatar
    Join Date
    Mar 2008
    Posts
    777
    Thanks
    127
    Thanked 146 Times in 87 Posts
    Rep Power
    258
    Reputation
    1887

    Default infinity

    Quote Originally Posted by tokalaNZ View Post
    Check that you have the same settings in LMedit as in the Infinity software now that you know you can talk to the card with phsmtest.
    ie Phoenix mode, 6MHz and comm port.

    well its got me beat, i did the test again with phsmtest. and this time it was good,, it read the fun, silver,and goldie, went back to LMedit, same result will read and write Goldie but dosn't want to know about silver or fun card, i think we have exhausted all avenues, i've got a cas3plus coming so i hope that will work properly..........once again thanks for your help, if you come up with any other ideas lets know. regards jim.

  • #13
    Premium Member
    OSIRUS's Avatar
    Join Date
    Jul 2008
    Location
    NSW
    Posts
    3,592
    Thanks
    10,571
    Thanked 2,467 Times in 958 Posts
    Rep Power
    1071
    Reputation
    38001

    Default

    Just another thought,

    have you tried to Program & Write to, some new cards (to rule out faulty cards) ?

    can you read the Silver & Fun Cards in other programs such as Card Explorer, & FMCard ?

    If you can get an ATR, & Version No, & a few other details it may mean the Ghost Files are all programmed correctly,

    have you got another Phoenix programmer laying around to try LMEdit ?

    I have a USB ($45 ?) Phoenix Programmer from satronics that I can use just for writing the Details to the card, (after programming the Pic & Eeprom on another programmer)

    & it works with LMEdit for Gold, Silver, Emerald, & Fun Cards, just to write the details to the Card,

    just some more ideas, (it is strange the Gold works & the others don't)

    Cheers
    Last edited by OSIRUS; 13-07-09 at 10:02 PM.
    Become a Premium Member and support the Austech Forum

  • #14
    Senior Member HILLVIEW103's Avatar
    Join Date
    Mar 2008
    Posts
    777
    Thanks
    127
    Thanked 146 Times in 87 Posts
    Rep Power
    258
    Reputation
    1887

    Default infinity

    Quote Originally Posted by OSIRUS View Post
    Just another thought,

    have you tried to Program & Write to, some new cards (to rule out faulty cards) ?

    can you read the Silver & Fun Cards in other programs such as Card Explorer, & FMCard ?

    If you can get an ATR, & Version No, & a few other details it may mean the Ghost Files are all programmed correctly,

    have you got another Phoenix programmer laying around to try LMEdit ?

    I have a USB ($45 ?) Phoenix Programmer from satronics that I can use just for writing the Details to the card, (after programming the Pic & Eeprom on another programmer)

    & it works with LMEdit for Gold, Silver, Emerald, & Fun Cards, just to write the details to the Card,

    just some more ideas, (it is strange the Gold works & the others don't)

    Cheers
    It reads cards in Gamma 4.1 program i can put the keys on a goldie using ghost gold editor it will program a goldie with hex etc, the silver card i have is a working card no probs, it just wont read it, same as fun card, i've had a guts full of the mongrel and i have just put on Ebay, i have got a Cas3 plus coming that i won on Ebay, i already have a cas3 plus but it shit itself, i'm not having a good run at the moment...thanks for you thoughts i'll let you know if things work out with the cas....Jim.

  • The Following User Says Thank You to HILLVIEW103 For This Useful Post:

    OSIRUS (14-07-09)

  • Similar Threads

    1. FS:infinity USB Unlimited
      By zeke.damien in forum Buy Sell and Trade
      Replies: 14
      Last Post: 04-06-09, 08:27 AM
    2. Infinity Usb Unlimited
      By bigfella08 in forum Programmers
      Replies: 3
      Last Post: 04-06-09, 12:20 AM
    3. Infinity USB Unlimited Problem
      By shlocker in forum Programmers
      Replies: 0
      Last Post: 24-02-09, 07:11 PM
    4. Infinity USB Phoenix Problem - need advice?
      By Hannible in forum Programmers
      Replies: 4
      Last Post: 16-04-08, 12:19 PM
    5. infinity plus
      By MAKEDONIJA in forum Automotive Technology
      Replies: 8
      Last Post: 07-01-08, 04:49 AM

    Bookmarks

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •