a standard jaycar will read the card without any modifications, if you want to test just load fmcard or CardExplorer and set the jaycar to Phoenix mode (push button in ) and set to 6mhz
hi guys i have a external jaycar reader and was wondering, is it capable to run a gamma card as is ?
thanks
Look Here -> |
a standard jaycar will read the card without any modifications, if you want to test just load fmcard or CardExplorer and set the jaycar to Phoenix mode (push button in ) and set to 6mhz
Thanks mate, In the settings in cccam i have the reader enabled are there any extra settings needed to use with the gamma like updating etc
cccam or newcs will keep the card updated 99 percent of the time.
then one morning it will be dead.
Use greywolf to avoid that, else you will need to log all cards then send an emk loaded packet to revive the serial number of your exact card.
unless u have spare irdeto 2 licensed box then wack it in there 30 minutes to few hours to revive it.
Chief
That will only work if they are still sending the EMK update.
Bookmarks