ok just tired it as well mate on an older firmware and it boots up .
What are your umd emu settings ?
Hi
does the psp need updating to play the latest games from the mem card?
I have tried the new harry potter game and it comes up with
The game could not be started
(80020148)
please let me know what you think
cheers
Haven't killed anyone who didn't deserve it.
Really the 4 that were killed deserved it.
Look Here -> |
ok just tired it as well mate on an older firmware and it boots up .
What are your umd emu settings ?
Do you have the M33 or $ony driver set so they load without a UMD?
PrecisionMods
the cfw on the psp is 3.10 OE-A'
currently set to 1.50 kernal
use no-umd (disabled)
all settings in advanced are disabled
have game (not hp) in umd drive
cpu set at 300mhz (have tried default)
have tried use no-umd (enabled) get same message
4gb mem card with almost 2gb free
game iso in iso folder. this is the only game that wont run. all others do. have tried 2 different ones and both do the same thing.
Haven't killed anyone who didn't deserve it.
Really the 4 that were killed deserved it.
ok take the umd out of the machine and turn it on , does not matter if your mem stick is in it or not .
Press the select button to bring up the firmware menu
the only thing to change would be
UMD ISO MODE
chenge this to M33 Driver
i am using the same firmware and no hassles
Last edited by poison; 22-07-09 at 01:19 AM.
Haven't killed anyone who didn't deserve it.
Really the 4 that were killed deserved it.
Try holding R1(shoulder button) & at the same time turn on psp....it should bring up the recovery mode...go into config then select the driver(it is part of the cfw).
PrecisionMods
It should be part of the custom firmware....but if other games work ok I dont think thats your issue.....maybe easier to d/l psp grader & upgrade to 5.00M33
PrecisionMods
this is the only game that wont work. all others have worked fine.
will look at upgrading. since I have cfw I should be able to upgrade to 3.52 m33 without any dramas.
Haven't killed anyone who didn't deserve it.
Really the 4 that were killed deserved it.
I have got HP to work. I ended up using hellkats updater to go to cfw 5.00. then I could select the different drivers and it works
Was going to upgrade to 3.52 but you need to have both 1.50 and 3.52 official fw on the mem card at same time and I only have a 64mb genuine mem stick. with hallkats you can just have the 1 OFW on mem card.
Not sure if I need it or not but you can get the 1.50 add on for older games. Tried scooby doo and it worked. so I am happy. well the daughter will be.
cheers
Haven't killed anyone who didn't deserve it.
Really the 4 that were killed deserved it.
Bookmarks