the firmware .
what is it
zic ??
there are two zic versions one will work one wont
Is there any reason why a 5410Z that is unmodified as far as I know won't work with a valid Austar sub card? It keeps giving a "Irdeto 16 or 30 error" I had thought these boxes should work OK with IRD2.
Look Here -> |
the firmware .
what is it
zic ??
there are two zic versions one will work one wont
dont say linux if i wanted it id install it
I'll check the version tomorrow
CA version info is 2.09h
H/W version OAK 11-L 2.0
S/W version ZIR 1.03.10
Loader version 5.15.1.1
Hope this helps
update it to ZIC10501 with WDN4OAK
all found at humax-zone.net
the file will be in the original firmware section
actually im in a decent mood so here you go all you need is a null modem cable to flash it
dont say linux if i wanted it id install it
Many thanks for your help. I'll update the firmware and let you know how it goes.
I have downloaded the 2 files - thanks. For some reason the upload does not complete, but usually stops about 840k out of 869k of the sdl file. I have tried all of the speed options but that doesn't work either. I have tried on 2 different PC's, both running XP with the same result.
Any clues??
just tried it and it downloads and opens fine something on your end
Does it matter that my version is ZIR 1.03.10 and I'm trying to download a ZIC file?
Bookmarks