Humax IR-5410Z

**paulrau** · 07-01-08, 07:21 AM

Is there any reason why a 5410Z that is unmodified as far as I know won't work with a valid Austar sub card? It keeps giving a "Irdeto 16 or 30 error" I had thought these boxes should work OK with IRD2.

**fandtm666** · 07-01-08, 07:44 AM

the firmware .

what is it

zic ??

there are two zic versions one will work one wont

**paulrau** · 07-01-08, 08:35 AM

I'll check the version tomorrow

**paulrau** · 08-01-08, 02:46 AM

CA version info is 2.09h
H/W version OAK 11-L 2.0
S/W version ZIR 1.03.10
Loader version 5.15.1.1

Hope this helps

**fandtm666** · 08-01-08, 02:50 AM

update it to ZIC10501 with WDN4OAK

all found at humax-zone.net

the file will be in the original firmware section

actually im in a decent mood so here you go all you need is a null modem cable to flash it

**paulrau** · 08-01-08, 03:53 AM

Many thanks for your help. I'll update the firmware and let you know how it goes.

**paulrau** · 08-01-08, 05:32 AM

I have downloaded the 2 files - thanks. For some reason the upload does not complete, but usually stops about 840k out of 869k of the sdl file. I have tried all of the speed options but that doesn't work either. I have tried on 2 different PC's, both running XP with the same result.
Any clues??