Just a heads up to you all. I've been helping the author of CrossEPG adapt it to Australia. You can download it from
If you have an Enigma2 box if you install it from the instructions it will give you a full 7 day EPG. Unlike the E2 loadepg that i posted here several months ago this version supports all HD channels.
It's also a little easier to install and setup than E2_loadepg. Should work pretty much out of the box. Let me know.
p.
Look Here -> |
Any hope for us Enigma 1 users with this new product?
on that site what box are they using that's the sort of EPG I want but I only have a DM500 and DM600. Will just upgrade I guess to get that function back.
I think pli, sqlite, oztivo and the internet is the only method to get (close to) full epg on E1 boxes -
Although I am the first to say we do want over the satellite epg load if someone can crack it for us.
Dm500, DM5620, DM600 x2, DM7000 x1, DM7020, DM7025, DM800, VU+DUO and a partridge in a pear tree
All it takes for evil to prevail is for good men to do nothing
Sorry. I didn't realise it wasn't working for enigma. I don't really have the time or energy to look into it but i would think that it shouldn't be too tricky at all given the ease with which we've been able to get the enigma2 stuff working.
Anyhow, for enigma2 folks, Cross EPG is a really elegant solution. I'm very impressed with it.
yeah but i cant get it to work... dunno why but it only has the bskyb ans skyitalia download modules... no aussie modules
2.3m motorized C-band mesh , 95 cm motorized Ku dish on aDM8000HDmake that IQ2 since 11/11/11
C-band : from Telstar 10 to Intelsat 2
Ku-band: fron NSS 6 to Intelsat 701
Yep. They're all Italians. My Skynews Active plugin and my tweaks to e2_loadepg and crossepg are all based on Italian plugins. the best thing that has happened to us is that news corp bought Sky Italia and converted everything to the same systems we use. The Italians reverse engineered it all and i've been playing with their code.
I've been using google translate but i've also been emailing a lot of the developers directly and most of them are very helpful and can handle themselves in English pretty well.
p.
is it gonna be a australian file for downloading epg or this is only for europe ?
2.3m motorized C-band mesh , 95 cm motorized Ku dish on aDM8000HDmake that IQ2 since 11/11/11
C-band : from Telstar 10 to Intelsat 2
Ku-band: fron NSS 6 to Intelsat 701
We've been playing with Cross EPG and there's a version that works perfectly here on an AU Enigma2 box. It should be working fine in the current crosspeg download (although i am running the beta not the distro version). ANyone got it going?
p.
2.3m motorized C-band mesh , 95 cm motorized Ku dish on aDM8000HDmake that IQ2 since 11/11/11
C-band : from Telstar 10 to Intelsat 2
Ku-band: fron NSS 6 to Intelsat 701
I dont' know what's in the current distro but try this:
Download crossepg form
Then install it as per the instructions. Then go into \usr\crossepg\providers\
and replace the details in the skyuk.conf file with these:
and then run the skyuk version from the web interface.Code:# nid ,tsid, sid nid=4096 tsid=17 sid=17008 namespace=102236160 # channels pids channels_pids=17 # titles pids titles_pids=48|49|50|51|52|53|54|55 # summaries pids summaries_pids=64|65|66|67|68|69|70|71 protocol=opentv
I think that should work - although make sure that you follow all the installation instructions correctly.
p,
pit5bul (02-08-09)
G'day P,
I gather that you're only interested in the 'off air' epg data and that crossepg has no support for combining radiotimes, oztivo and 'off air' epg (including assigning specific channels to specific epg arbitrarily) as I currently do with loadepg on my DM7025.
Whilst this is my impression from reading forums, crossepg web site; I am not sure and thought that you might confirm this for me before I went to the trouble of disturbing my loadepg installation?
regards
Yep, for your needs loadepg is probably better. CrossEpg has two big advantages for others:
1. It autoconfigures - you don't need to tell it which channels are which (although you can create aliases so that EPG data is duplicated). Much less mucking around with configs. Much easier for noobs.
2. It does the HD channels - which quite a few people have complained that Loadepg does not do.
However it doesn't read oztivo or any XMLTV files or anything like that.
p.
go on ajm - do a backup and give it a go
if nothing else you can give us a comparison review between loadepg and crossepg
If I had an enigma2 dream - I know I would
In fact if anyone has a 7025 to give me ... I'll definitely give it a go
(I'd love to add a 7025 to that list below)
Last edited by nfnovice; 01-08-09 at 07:44 PM. Reason: beg for a 7025
Dm500, DM5620, DM600 x2, DM7000 x1, DM7020, DM7025, DM800, VU+DUO and a partridge in a pear tree
All it takes for evil to prevail is for good men to do nothing
2.3m motorized C-band mesh , 95 cm motorized Ku dish on aDM8000HDmake that IQ2 since 11/11/11
C-band : from Telstar 10 to Intelsat 2
Ku-band: fron NSS 6 to Intelsat 701
does anyone have this running under the pli image?
ive upgraded to 4.4 gemini and surpise surprise it stopped working... the crossepg setup plugin doesnt show anymore
2.3m motorized C-band mesh , 95 cm motorized Ku dish on aDM8000HDmake that IQ2 since 11/11/11
C-band : from Telstar 10 to Intelsat 2
Ku-band: fron NSS 6 to Intelsat 701
Bookmarks