connect a newcamd client to cccam server?

**nihonjin** · 19-08-09, 11:59 PM

Originally Posted by checkitout

If you get prompted for a password just press enter. You will then be in the NewCs console where you can view what is happening, card registering, users logging etc.

I did this and get the following:

Loader Reset failed
Loader Reader type 5 on node /dev/sci1
Sci Closing device /dev/sci1 [Handle=-1]
Sci Could not open device /dev/sci1 [might be in use by another process?

And this keeps repeating itself.

**nihonjin** · 20-08-09, 12:03 AM

Originally Posted by covert

Telnet into the dm500 and run these commands.

Code:

killall CCcam
CCcam -d

(CCcam might be case sensitive. running ps will tell you what process name CCcam is.)

CCcam will start to output with details on how it is running and hopefully any problems it is having.

This is what i get:

login from 192.168.1.8
newcamd server 192.168.1.8:12000 user: user1
newcamd receive error -1
kick 192.168.1.8, signature failed

What do you suggest?

**covert** · 20-08-09, 12:29 AM

Looks like cccam is using the card reader and newcs is failing to open it. Disable the card reader in the relevant section in cccam.cfg

**nihonjin** · 20-08-09, 01:28 AM

ok i seem to have managed to get somewhere but still no pics.

I now get for the cardinfo:

Keyman Adding key.....
Loader Card 096c.....
Loader Starting Newcamd.....
Newcamd Newcamd thread server started on port 10000
Newcamd[10000] bad read....

Then it shows me the entitlements for card 0 and shows my cccam client logged in.

Where to now?

**covert** · 20-08-09, 01:54 AM

Now try cccam -d again

Code:

killall CCcam
CCcam -d

**nihonjin** · 20-08-09, 02:41 AM

Originally Posted by covert

Now try cccam -d again

Ok this is what i now get Please let me know what i can do to get pics. Thanks

17

11.192 CCcam: ================================================== =======
==========
17

11.194 CCcam: starting CCcam 2.1.2 compiled on Jul 17 2009@18

04
17

11.194 CCcam: ================================================== =======
==========
17

11.195 CCcam: online using nodeId 31bdde66a0c5f649
17

11.206 CCcam: dvb api1 detected
17

11.208 CCcam: DM56xx/500/600 detected
17

11.208 CCcam: create 2 cam device(s)
17

11.393 CCcam: added 0 keys from /var/keys/SoftCam.Key
17

11.394 CCcam: added 1 keys from /var/keys/AutoRoll.Key
17

11.395 CCcam: static cw not found or bad
17

11.396 CCcam: parsed 0 entries from /var/etc/CCcam.prio
17

11.397 CCcam: readProviderfile: cannot open /var/etc/CCcam.providers or
t found
17

11.397 CCcam: readChannelList: cannot open /var/etc/CCcam.channelinfo o
ot found
17

11.398 CCcam: server started on port 12000
17

11.411 CCcam: newcamd server 127.0.0.1:10000 user: user1
17

11.421 CCcam: newcamd caid 096c providers 1 userid: 0
17

11.422 CCcam: newcamd card serial: 0123456
17

11.422 CCcam: newcamd prov 00 000000 0134567
17

11.428 CCcam: found irdeto caid: 0x604 ecmpid: 0x1771 id: 0x0
17

11.429 CCcam: found nds caid: 0x96c ecmpid: 0x157d id: 0x0
17

11.430 CCcam: found nds caid: 0x90b ecmpid: 0x1389 id: 0x0
17

11.430 CCcam: cam[0] set PMT for sid=3e9
17

11.433 CCcam: start EMM
17

11.493 CCcam: EMM demux 1 set
17

11.494 CCcam: EMM: start filter on nds emmpid: 0xc0 caid: 0x96c id: 0x0
17

11.495 CCcam: EMM: not interested in 090B:000000
17

11.496 CCcam: EMM: start filter on irdeto emmpid: 0x3ea caid: 0x624 id:
0
17

11.498 CCcam: EMM: start filter on irdeto emmpid: 0x3ea caid: 0x604 id:
0
17

11.501 CCcam: newcamd ecm -> 127.0.0.1:10000
17

11.504 CCcam: newcamd ecm <- 127.0.0.1:10000 error
17

11.505 CCcam: cam[0] ecm even nok caid:0x96c id:0x0 pid:0x157d Unknown
17

11.884 CCcam: chid 0006
17

11.884 CCcam: chid 001B
17

11.884 CCcam: chid 0192
17

11.885 CCcam: chid 023D
17

11.885 CCcam: cam[0] ecm odd nok caid:0x604 id:0x0 pid:0x1771 Unknown
17

12.070 CCcam: cam[0] ecm even nok caid:0x96c id:0x0 pid:0x157d Unknown
17

12.265 CCcam: chid 0006
17

12.265 CCcam: chid 001B
17

12.266 CCcam: chid 0192
17

12.266 CCcam: chid 023D
17

12.266 CCcam: cam[0] ecm odd nok caid:0x604 id:0x0 pid:0x1771 Unknown
17

12.451 CCcam: newcamd ecm -> 127.0.0.1:10000
17

12.452 CCcam: newcamd ecm <- 127.0.0.1:10000 failure from cache
17

12.452 CCcam: cam[0] ecm even nok caid:0x96c id:0x0 pid:0x157d Unknown
17

12.644 CCcam: chid 0006
17

12.644 CCcam: chid 001B
17

12.645 CCcam: chid 0192
17

12.645 CCcam: chid 023D
17

12.645 CCcam: cam[0] ecm odd nok caid:0x604 id:0x0 pid:0x1771 Unknown
17

18.799 CCcam: newcamd ecm -> 127.0.0.1:10000
17

18.802 CCcam: newcamd ecm <- 127.0.0.1:10000 error
17

18.806 CCcam: cam[0] ecm odd nok caid:0x96c id:0x0 pid:0x157d Unknown
17

19.183 CCcam: chid 0006
17

19.183 CCcam: chid 001B
17

19.183 CCcam: chid 0192
17

19.184 CCcam: chid 023D
17

19.185 CCcam: cam[0] ecm even nok caid:0x604 id:0x0 pid:0x1771 Unknown
17

19.369 CCcam: newcamd ecm -> 127.0.0.1:10000
17

19.369 CCcam: newcamd ecm <- 127.0.0.1:10000 failure from cache
17

19.369 CCcam: cam[0] ecm odd nok caid:0x96c id:0x0 pid:0x157d Unknown
17

19.565 CCcam: chid 0006
17

19.565 CCcam: chid 001B
17

19.565 CCcam: chid 0192
17

19.565 CCcam: chid 023D
17

19.566 CCcam: cam[0] ecm even nok caid:0x604 id:0x0 pid:0x1771 Unknown
17

19.749 CCcam: newcamd ecm -> 127.0.0.1:10000
17

19.749 CCcam: newcamd ecm <- 127.0.0.1:10000 failure from cache
17

19.750 CCcam: cam[0] ecm odd nok caid:0x96c id:0x0 pid:0x157d Unknown
17

19.945 CCcam: chid 0006
17

19.946 CCcam: chid 001B
17

19.946 CCcam: chid 0192
17

19.947 CCcam: chid 023D
17

19.949 CCcam: cam[0] ecm even nok caid:0x604 id:0x0 pid:0x1771 Unknown
17

28.968 CCcam: newcamd ecm -> 127.0.0.1:10000
17

28.970 CCcam: newcamd ecm <- 127.0.0.1:10000 error
17

28.973 CCcam: cam[0] ecm even nok caid:0x96c id:0x0 pid:0x157d Unknown

**nihonjin** · 20-08-09, 06:46 PM

Another question. I have the boxkey in the newcs.xml file should i also have it in the cccam.cfg file?

I have tried both with and without and it made no difference but this could be because of a number of problems and i just want to narrow down the causes.

Remember i am using a orange card.

thanks.

**covert** · 20-08-09, 07:03 PM

What are the newcs logs saying at the same time ?

**nihonjin** · 20-08-09, 07:48 PM

i logged in and it just came up with the newcs menu basically waiting for me to type in whatever commands i wanted.

I did a few but nothing really made any sence.

What particular command should i check ie stats, user etc

thanks.

**covert** · 20-08-09, 07:50 PM

When you log into newcs change logging to spam / all. I think the command is loglevel.. help will tell you.

[edit]typing in a rush. about to go out.

**jonc** · 20-08-09, 09:02 PM

1. set up newcs only (no client) as the card server and get it working 100%. You can run the command from /var/bin ./newcs -nd and you will see the data on your telnet screen (depending on the debug levels you have set in newcs.xml)

2. Once newcs is set up and you have it working, and only then, setup up your CCcam client on the DM500. All you need in your /var/etc/CCcam.cfg is the N: line - i.e.;
N: 127.0.0.1 15000 user1 passwd 01 02 03 04 05 06 07 08 09 10 11 12 13 14

You should now be seeing TV.

If not use, port 16001 on your DM500 to check what CCcam is doing - i.e. Is CCcam connected to your newcs server? If not why not? Did you set up the users in newcs.xml. Did you enter the correct user data from newcs.xml in your /var/etc/CCcam.cfg

etc etc ... If it works put the second user you set in newcs (newcs.xml) into openshare and watch TV

**nihonjin** · 20-08-09, 09:53 PM

ok good advice jonc.

I have no softcam selected and only running newcs in the cardserver.

This is what i get when i reset the reader, but still no pics. Any clues with what is below?

Reset reader 0: /dev/sci0

-> [ 20:50:26 ] [ Loader ] Reader type 5 on node /dev/sci0
[ 20:50:26 ] [ Sci ] Closing device /dev/sci0 [Handle=3]
[ 20:50:26 ] [ Sci ] Opening device /dev/sci0
[ 20:50:26 ] [ Sci ] resetting card now
[ 20:50:26 ] [ Sci ] Reset
[ 20:50:26 ] [ Sci ] Card reset
[ 20:50:28 ] [ ATR ] T=0 1etu=372.00us Guardtime:14etu WWT:14400etu
[ 20:50:28 ] [ ATR ] Historical bytes: A [B0] [03] i [FF] J P [F0] [80] [00] F D [03]
[ 20:50:28 ] [ Loader ] Init NDS card
[ 20:50:29 ] [ KeymaN ] Adding key 00000001234567 type 0 on Provider 000000 for
caid 096C ID=0
[ 20:50:29 ] [ KeymaN ] Adding key 0000000123456 type 1 on Provider 000000 for
caid 096C ID=0
[ 20:50:29 ] [ Loader ] Card 096C on port /dev/sci0 ready

**nihonjin** · 20-08-09, 09:54 PM

here is my newcs config file:

<newCSconfig>
<readers name="SCI">
<device>
<name>Lower Cardreader</name>
<type>sci</type>
<mhz>500</mhz>
<node>/dev/sci0</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>


<irdeto-camkey>0000000000000000</irdeto-camkey>
<irdeto-camkey-data>000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000</irdeto-camkey-data>
<crypto-special>No</crypto-special>
<ipk>000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000</ipk>
<ucpk>00000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 000000000000</ucpk>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>10000</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
</device>
</readers>
<radegastserver>
<enabled>No</enabled>
<port>16000</port>
<allow>
<hostname>localhost</hostname>
</allow>
</radegastserver>
<cache>
<emm>20</emm>
<ecm>-1</ecm>
</cache>
<debug>
<password></password>
<level>normal</level>
<type>init</type>
<output>spam,all</output>
<console_options>normal,init</console_options>
<tcp_port>1001</tcp_port>
<tcp_options>normal,init</tcp_options>
</debug>
<newcamdserver>
<enabled>Yes</enabled>
<name>newcs</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<user>
<name>user1</name>
<password>pass1</password>
<hostname>localhost</hostname>
<au>on</au>
<sidoverride>off</sidoverride>
<spider>No</spider>
<rate>2</rate>
</user>
</newcamdserver>
</newCSconfig>

**nihonjin** · 20-08-09, 10:23 PM

i have just realised that my boxkey is commented out so all this time it would not be working. I have since removed it but still no pics. What is rsa that is below it do i need this to get pics on an orange card?

**d4g** · 21-08-09, 08:45 AM

<newCSconfig>
<readers name="SCI">
<device>
<name>Lower Cardreader</name>
<type>sci</type>
<mhz>358</mhz>
<node>/dev/sci0</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<boxkey>12345678</boxkey>

<irdeto-camkey>0000000000000000</irdeto-camkey>
<irdeto-camkey-data>000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000</irdeto-camkey-data>
<crypto-special>No</crypto-special>
<ipk>0000000000000000000000000000000000000000000 00 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000</ipk>
<ucpk>000000000000000000000000000000000000000000 00 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 000000000000</ucpk>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>10000</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
</device>
</readers>
<radegastserver>
<enabled>No</enabled>
<port>16000</port>
<allow>
<hostname>localhost</hostname>
</allow>
</radegastserver>
<cache>
<emm>20</emm>
<ecm>-1</ecm>
</cache>
<debug>
<password></password>
<level>normal</level>
<type>init</type>
<output>spam,all</output>
<console_options>normal,init</console_options>
<tcp_port>1001</tcp_port>
<tcp_options>normal,init</tcp_options>
</debug>
<newcamdserver>
<enabled>Yes</enabled>
<name>newcs</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<user>
<name>user1</name>
<password>pass1</password>
<hostname>localhost</hostname>
<au>on</au>
<sidoverride>off</sidoverride>
<spider>No</spider>
<rate>2</rate>
</user>
<user>
<name>user</name>
<password>pass</password>
<au>on</au>
</user>
</user>
</newcamdserver>
</newCSconfig>

and u need to use a soft cam either mgcand
with config

CWS_KEEPALIVE = 300
CWS_INCOMING_PORT = 21000
CWS = 127.0.0.1 1000 user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan newcs

or cccam

config

N: 127.0.0.1 1000 user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14

or just use cccam with this config only with box key

BOXKEY: /dev/sci0 00 11 22 33

all this in the fron slot of a dm500s

**d4g** · 21-08-09, 08:46 AM

the ports need to match teh newcs port ok
see how you go

**nihonjin** · 21-08-09, 09:37 AM

thanks d4g for your help i will try this later tonight.

I was just getting newcs to work before i connect cccam as a client. Should i still be able to get pics with no softcam and only newcs in the cardserver?

I can get pics just with cccam no problems. But i need to run a newcamd server for a different client.

thanks.

**covert** · 21-08-09, 11:42 AM

You always need a softcam to get picture.

You have established CCcam is getting an error when it tries to get a key. You need to check what the problem is with NewCS.

Either killall newcs like you did with cccam and then run newcs with -nd option

or telnet into NewCS (check <debug><tcp_port> value in newcs xml) and type "level spam"

Double check your box key. Not having worked with a boxkey I am unsure what error newcs will generate when it is wrong (if any) but I believe the card will work as normal except for giving the all important ecm's cccam needs to decode the picture.

**jonc** · 21-08-09, 01:21 PM

You should remove the irdeto lines as you are using a NDS card;

<irdeto-camkey>0000000000000000</irdeto-camkey>
<irdeto-camkey-data>000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000</irdeto-camkey-data>
<ipk>0000000000000000000000000000000000000000000 00 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000</ipk>
<ucpk>000000000000000000000000000000000000000000 00 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 000000000000</ucpk>

You will know it is working when the openbox get pictures. When that happens add the 1 line of code only (with your details into it) in to your /var/etc/CCcam.cfg as per the example I gave above.

**nihonjin** · 21-08-09, 02:37 PM

at this point in time i am not worrying about the openbox. I just want to get pics while using newcs.

I need to clear something up. It has been suggested to get news working before i worry about cccam connecting as a client.

I can get pics when just using cccam but when i use newcs i cant.

My setup in the softcam menu (pli jade image):

softcam = none
cardserver = newcs

is this correct or do i still need something in the softcam?

I thought in the newcs.xml file i direct it to use the card reader and input my boxkey so it should not matter if i have nothing in the softcam option.

I cant keep staying up in the wee hours of the morning trying to get this to work but it is just so frustrating.

thanks for all those who have tried to help hopefully i get it to work soon.