Reply With Quoteunless things have changed as far as i could work out is that it could not be changed in the 7020
DM7020's with same mac's
I can't get one box to change it's mac. I create an init file with
ifconfig eth0 down; ifconfig eth0 hw ether 0023:44:97:E5; ifconfig eth0 up
in \var\etc and reboot the box. I telnet back to the box and ifconfig and the mac hasn't changed! Can anyone explain what I'm doing wrong pls?
Thanks,
Leroy
XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS
| Look Here -> |
unless things have changed as far as i could work out is that it could not be changed in the 7020
dont say linux if i wanted it id install it
thanks for that I now remember that thread.Originally Posted by diavalo13666
So does anyone know how can the mac be changed via the bootloader by jtagging?
Cheers,
Leroy
XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS
Has anyone tried jonc's suggestion?
Leroy
XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS
That's really no different to what you did in your first post.
hmmm so changing via boot loader may be the only option....
Leroy
XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS
Try putting the file in /etc/init.d instead of /var/etcI create an init file with
ifconfig eth0 down; ifconfig eth0 hw ether 00
it buggers up the mac and makes it invalid. When I arp all fields in the mac are 00!
Oh and of course I can't connect via ftp etc to fix!! :0
Leroy
Last edited by LeroyPatrol; 10-09-09 at 12:22 AM.
XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS
Posting Permissions
Bookmarks