DM500c f*x lost Channel 9 and 10

[mikkaa]

Hi all,
Need some help.
My setup is 2 DM500c CCCam with Jade PLi.
Originaly I wanted to test the setup out, then box everything and use the original f*x products until my second box was disabled. When testing all channels were working perfectly.
Tonight i setup the DM500c's again and found i have lost channel 9 and channel 10 (Sydney FTA). The channels show in the channel list and bouquet, (3 Channel 9, 3 channel 10, and 3 channel 7 - Syd, Melb, Bris as per normal) and whats currently showing appears in the menu as well, but i cant get a video/audio signal at all. I tried to rescan with the same effect,(channels show in list with whats on, but no video/audio).
Channel 7 works fine.

Any help would be greatly appreciated, asim struggling......

thanks in advance

m

[nihonjin]

what frequency are you using when scanning the channels. I believe you need to use 722mhz and not 618mhz. check this thread out:

[mikkaa]

Thankyou for the quick response Nihonjin, il try it as soon as i get a chance and let you know, prb wont be til the weekend, as its not my house.

Thankyou