Which card?
hey there can someone please shed some light
my newcs 1.50 win32 server is not getting updates
from reading various sites and checking my server stats emm's are clocking up
im using boxes with cccam205 & cccam 207 but every month i have to do the swap thing
am i missing something ???
any help would be great
Look Here -> |
Which card?
whitie will not update you will have to stick in a irdeto compliant box once a month roughly to update or log the stream.
Chief
Maybe try using mgcamd1.29 with newcs 1.5 set your clients to AU. Look for Warbo's post for the setup.
yes it is a whitey
thanks guys will check it out
other people are saying there's is running with no swap for a year or more ???
is there a win32 cccam server ???
i have been using cccam since 1.7.1 through to 2.0.7 will none of these update?
tried to update card in dreambox card slot but didnt work, why does it have to be irdeto compliant whats missing in the dream software
Vex - dreambox emu's will not update whitey -hence your card dies , but there is reports from warbo that newcs32 & mgcamd 128 & higher will update till we get more tests and reports done we will not know for sure.
Chief
thanx for that im try'n it now
but my box is not loggin on to the server with mgcamd 1.28
am following warbos config and putting my details in
im using a dm500 with gem 4.1 in newcamd.conf. it has dbox2 & 7000 & dm5600
no valid dm500 option is this the cause ??
thanx for the help again
i think i have tried everything, i still cant get mgcamd1.29 to log into newcs 1.50
is there a solution for the blue one ???
what ive read is gwm for white
am running gemini 4.10 on dm500s cam 2.05 which logs in fine to newcs 1.50 win32 via wan
MgCamd 1.29 configs not loggin in at all
a blue is in newcs at moment waiting for white to update in a strong4653
newcamd.conf
# /var/tuxbox/config/newcamd.conf
#
# this is the configfile for MGCamd with NewCS!!!!
#
#
# What Demux API is used? (1 = very old, 2 = rel (Dreambox), 3 = head (VDR))
DEMUX_API = 2
# on PPC version: What Box is used? Valid options are DBOX2, DM7000 and DM5600
# on I386 version this parameter is ignored
BOX_TYPE = DM7000
# Which device for writing control words should be used?
# Valid options are CA, SDEV or GTX
# (SDEV and GTX = /proc/bus/gtx, CA = /dev/caX or /dev/dvb/card0/caX)
CONTROL_WORD_DEVICE = CA
# What CA0 API is used?
# 3 for recent DVB-S driver or recent Dreambox drivers (dream.o from 1.07.3)
# also for ca1 use on dbox2
# 2 for older Dreambox driver (ca.o or dream.o up to 1.07.2)
# no effect on PPC version if CONTROL_WORD_DEVICE = GTX or SDEV
CA_API = 3
# output control words to /proc/bus/gtx in 16 byte or 4096 byte packets
# no effect on I386 version or on PPC version, if BOX_TYPE = DREAMBOX
GTX_OUTPUT_MODE = 16
# This is important for channels which frequently change between free and
# encrypted broadcasts. The change will be reflected in the PMT. If you
# don't want your picture to stop when the channel goes from free access
# mode to encrypted mode, either your zapper (zapit/Enigma) or newcamd
# itself has to keep track of PMT changes. Recent Enigma versions do this,
# so you can set PMT_UPDATE_WATCH to no. Recent Zapit versions also have
# this option, but it is not compiled by default. So when using Zapit
# without PMT updates, you need to enable newcamd to monitor the PMT
# (PMT_UPDATE_WATCH = yes). Having both zapper and newcamd monitor
# the PMT at the same time, can lead to all kind of instabilities and
# should therefore by avoided, even if it seems to work at first.
PMT_UPDATE_WATCH = yes
# Use emulator?
EMU = yes
# if both control word server and emulator keys are available for the
# channel, which method should be tried first?
PREFER_EMU = yes
# deactivates the dbox2 Betacrypt CAM
# this has to be set to yes on Dreambox
DISABLE_CAM = yes
# use dbox2 Betacrypt CAM for caids 06, 17 or both (00)?
CAM_CASYS = 17
# Autoupdate for Emu and Control Word Servers
# AU is always yes if there are Betacrypt UDS control word server
# connected to newcamd
AU = yes
#
# newcamd debug options
#
# dumps all ca systems used by a channel on the console
SHOW_ALL_CA_SYSTEMS = no
# On Screen Display, neutrino, enigma or none
OSD = none
# Recent Enigma versions come with a new option "Use http authentication"
# in the Expert Setup menu. If this option is enabled, the Enigma web server
# requires all clients to authorize themselves with username (root) and
# password (usually dbox2 or dreambox). The following option tells newcamd
# about the authentication username and password to use for the web server
# in order to be able to display its on screen information.
OSD_WEB_LOGIN = root:########
# print debug messages about ECM handling
DEBUG_ECM = yes
# print debug messages about EMM handling
DEBUG_EMM = no
# print debug messages about Control Word Server (CWS)
DEBUG_CWS = yes
# print debug messages about dbox2 CAM (cam-alpha.bin)
DEBUG_CAM = yes
# print command message to/from dbox2 CAM as hex strings
DEBUG_CAM_HEX = no
# print all plain control words used
SHOW_CW = no
# hex dump of entire PAT
SHOW_PAT = no
# hex dump of entire PMT
SHOW_PMT = no
# hex dump of entire ECM
SHOW_ECM = no
# hex dump of entire CAT
SHOW_CAT = no
# hex dump of entire EMM (AU)
SHOW_EMM = no
# show network ECM messages being sent and received from/to the cardservers
SHOW_CWS_ECM = no
# show network EMM messages being sent and received from/to the cardservers
SHOW_CWS_EMM = no
# hex dump of EMMs with wrong signature
EMM_REPORT_WRONG_SIG = no
# delay between channel zap and appearance of the OSD
OSD_WAIT_TIME = 2000
#
# newcamd optional settings
#
# Delay between reception of new control word and writing them into
# the CSA registers
# this is a default, can be changed for each individual key in keylist
DEFAULT_CW_DELAY = 500
# reload config on every channel zap
RELOAD_CONFIG_ON_ZAP = yes
# reload keylist on every channel zap
RELOAD_KEYLIST_ON_ZAP = no
# write osd ca info to file
# CA_INFO_FILE = /tmp/cainfo.txt
#
# newcamd mandatory settings for control word servers (cws)
#
# Cardserver list
#
# <hostname> <port> <username> <password> <14 byte triple-des key in hex> <lan/wan> <cardserver name>
#
# wan connections will be dropped and rebuild if newcamd is told so by camdcmd
# (see admin options)
#
# hostname = uds to use betad, port is the serial port in that case
#
#CWS = uds 1 premiere premiere
#CWS = 127.0.0.1 10001 local local 01 02 03 04 05 06 07 08 09 10 11 12 13 14 wan cardserv
CWS = ###.###.###.### ##000 #### #### 01 02 03 04 05 06 07 08 09 10 11 12 13 14 wan ####
#CWS = 127.0.0.1 34001 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan newcs
#
# newcamd optional settings for using control word servers (cws)
#
# Timeout for cardserver login in 100ms
CWS_CONNECT_TIMEOUT = 20
# Port to listen for incoming cardserver connections (reverse login)
# and/or admin connections
CWS_INCOMING_PORT = 12000
# Port to get a list of all connected cardservers, just telnet to it
CWS_DEBUG_PORT = 12001
#
# newcamd admin control options
# (incoming port is the same as CWS_INCOMING_PORT)
#
# <password> <14 byte des key>
#
ADMIN_PASSWORD = secret 00 00 00 00 00 00 00 00 00 00 00 00 00 00
mg_cfg
# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 00 }
# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 01 }
# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 01 }
# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
U: { 02 }
# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }
# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
G: { 01 }
# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 30
# network ecm timeout in seconds
K: { 05 }
# newcamd dead routes connect retry, sec
Q: { 600 }
# network shares priority
# 00 gbox, newcamd, radegast, camd3 (default)
# 01 camd3, radegast, newcamd, gbox
# 02 newcamd, camd3, gbox, radegast
P: { 02 }
# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } username password
thanx for all help offered
Maybe try taking everything out of the newcamd.conf file and only leave in the line below. There maybe something in there stopping it from working.
CWS = SERVERADDRESS PORT USERNAME PASSWORD 01 02 03 04 05 06 07 08 09 10 11 12 13 14 wan newcs (newcs being name of server. Change if different name)
Your mg_cfg file looks fine so hopefully this will fix it.
nope no go ..... it seems does not like dm500s ?
rem'ed out, rebooted, droped the wan or changed to lan, droped the server name. checked the ip and port.
does not even try to log in no (not ok or invalid user) nothing ?
2.05 cam logs in ok every time ?
im a bit lost ......................sorry?
probablt the tick thing on "dont use serial port" ?
maybe you use /var/keys/newcamd.list and he does not as I do not see it mentioned anywhere above.
This is where your;
CWS = SERVERADDRESS PORT USERNAME PASSWORD 01 02 03 04 05 06 07 08 09 10 11 12 13 14 wan newcs
files reside (make sure the 01 02 etc are correct as out of the box they will not be)
i cut and pasted the cws = details to the newcamd.list
an up she cam strait away hmmmm
this list looked to me like a server list of users ???
thanx guys for the help and yeh it works
but do we know 100% it does update or still testing to find out ???
Well that's strange, I don't use newcamd.list in either the 500 or 7020. But well done for getting it going.
We don't know yet 100% if it will keep the gam updated. There are some guys more knowledgeable than I that insist the cam has nothing to do with updating newcs. It seems to update mine alright so far.
Bookmarks