Hi,
Is someone have any document on dm500s' jtag.
I dowload the bootloader for DM500 (thanks to fandtm666).
Bur i haven't any cable or any interface and don't know how to made it.
Thanks a lot for your help.
DM500S (Jtag needed)
Look Here -> |
thanks wierdo for the pics and pinout
Signal Pin Pin Signal
TDO 1 2 N/C
TDI 3 4 TRST
N/C 5 6 VCCS
TCK 7 8 N/C
TMS 9 10 N/C
HALT 11 12 N/C
N/C 13 14 ***
N/C 15 16 GND
db25 . . decoder
2 --> 100 ohms --> 11 ( Halt)
3 --> 100 ohms --> 9 ( Tms )
4 --> 100 ohms --> 7 ( Tck )
5 --> 100 ohms --> 3 ( Tdi )
11 --> 100 ohms --> 1 ( Tdo )
25 ------------------ 16 ( Ground)
A Cas3 (and the Cas2 i think) can also be used to jtag the dreams.
What would you do if your server was stolen or failed beyond repair?
http://www.2000cn.com.au/shadowprotect.html
thanks a lot everybody
DM500S (Jtag needed)
I used CAS2 on DM500 and did NOT work, i think it's for dream 7000 or 7020.
I used The post by "fandtm666" again no success, but if u cannot get a successfull connect , try & try & try again , there have to be less than a second delay between connecting the power and pressing the connect button on jtag software.
the i found this great tools , and 100% worked perfectly like a charm.
gw1 (08-10-09)
Thank you for file jtag dm500
will be available for 7 says
Last edited by fandtm666; 05-01-19 at 10:29 PM.
Bookmarks