-
Connecting TS0091 to Modem
Hi all,
Does anyone know how to connect an external modem to TS0091 COmp/Printer Interface card? I have been trying all sorts of combinations and the modem is not talking to the panel. Have also tried to set modem to auto-answer, DTR settings, etc... Help appreciated. Many thanks.
-
Junior Member
- Rep Power
- 205
- Reputation
- 120
As far as I am aware, the card is NOT for connection to a modem, but rather DIRECTLY to a PC and/or printer. Check the manual for DIRECT connection details. IE you can connect your laptop DIRECTLY to the card from the laptops serial port without the need for a modem.
If you want the modem for dialing into the panel for off site programming etc, you use the panels built in modem and dial into that.
Thanks. Already knew that. The panel is connected to a leased line, dial-in not possible.
Junior Member
- Rep Power
- 199
- Reputation
- 10
What are you trying to achieve? Please give more info of the goal so we can give you the answers you might seek.
Just trying to dial into a challenger panel via an external modem connected to TS0091 Computer Printer Interface Card.
I know I can use the panels internal modem, but its not available, because it is not connected to the PSTN.
Junior Member
- Rep Power
- 0
- Reputation
- 10
Computer Interface (Challenger) LINE DB9 DB25
GND---------------------------------------------------------GND 5 7
RTS---| Locally Linked |--------CTS 8 5
CTS---| |--------RTS 7 4
TX-----------------------------------------------------------TX 3 2
RX-----------------------------------------------------------RX 2 3
Locally Linked |---------DSR 6 6
|---------DTR 4 20
Modem strings – AT\n0%c0&d2q1s0=2&u2&w – Mega-I-modem
- At\n0&q0&d0q1s0=2&w – Roadster 2 modem
Or for a different brand:
\n0 – No Error correction
&d2 – Modem disconnects if the DTR is not detected.
q1 – suppress modem responses
s0=2 – Answer after 2 rings
&u2 – V32.Bis / V22.Bis
Titan setup will be the same as per a normal dial in challenger, with the exception that it must be configured as a Multi Ring. 1 ring, 1 call should work fine.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks