not sure, but I think its answered in here.... from memory thats where I found out about it.
MIGHT BE WRONG!
my ppua file keeps getting overwritten by a zero byte one. using newcamd.
tried playing with file permissions but it keeps happening.
Look Here -> |
not sure, but I think its answered in here.... from memory thats where I found out about it.
MIGHT BE WRONG!
If you feed ducks at a pond, chances are your bound to feed a goose or two without even knowing it.
no good.
still seeking answers, i'm assuming it's something to do with permissions, but like i said i already tried playing with them.
am i missing something here?
what permission did you set it at?
i vaguely remember the same thing happening to me, it was quite a while ago. I even more vaguely remember booting DM, and ftp'ing over the ppua file or that the file was incorrectly saved as a .txt file, I'll have to look into this MYSELF as i need to do it too for my own usage
just checked mine and its set to 644, same as keylist in /var/scce
this was months ago mind you last time it was working here
Last edited by z1gg33; 28-10-09 at 12:18 AM.
If you feed ducks at a pond, chances are your bound to feed a goose or two without even knowing it.
Become a Premium Member and support the Austech Forum
ok, thought i better have a go at getting mine to work
this is all did to get mine working. (THERE IS GURU'S HERE that no sooo much more than me) so this is just what I had to do.
You might have to other things, have it setup differently.
MINE IS SETUP TO USE NEWCAMD ON channel WIN
I left my ppua file and keylist file that last worked 3months ago in /var/scce
i installed newcamd
i rebooted the dm
i changed channel to win
IT DID NOT WORK
i telneted into dm
i then did cd /bin/var
i then did ps
i could see that newcamd was running
i did kill XYZ (the newcamd process num)
i then did ./newcamd -d
I RECIVED ERRORS MESSAGES indicating that it could not read the config file and parse error:3 ppua
I then downloaded newcamd config (DOH!!! forgot to because its late)
I rebooted the dm
i then cd to root and repeated the steps of killing newcamd
and running newcamd -d
and had no errors,
i switch channel to win
and pics popped up
NFI why yours is being overwritten, sorry BUT I HOPE YOU GET IT GOING
but you might try telnetting in and running newcamd -d and see what errors you are getting , as it should tell you it has loaded ppua or a parse error perhaps?
edit : as OSIRUS says above, my ppua file has had a new line added since it started working again.
edit:2 i just re-read this which is the best explanation of whats what
Last edited by z1gg33; 29-10-09 at 03:11 AM. Reason: double checked something
If you feed ducks at a pond, chances are your bound to feed a goose or two without even knowing it.
Goose (30-06-10)
I had my DM500 with Newcamd & ppua switched off for about 3 months,
Powered it up & had to wait about 35min to get a PMK update, to get pic's
Working fine from then on,
Cheers
(don't forget to wait for the PMK update, usually within about 1 hour)
Last edited by OSIRUS; 29-10-09 at 07:08 AM.
Become a Premium Member and support the Austech Forum
this has got me totally f'ed.
i'll review the newcamd config and check for errors.
the thing is... it works when i ftp the file in..... then i guess when the roll happens it tries to update but it instead writes 0 bytes to the file.
but yeah.... i'll keep trying and post results here for anyone who needs the info.
weirdo dreambox!!!
it is working.... for now
does anyone understand better why the file is being overwritten?
root@dm600pvr / # newcamd -d
[newcamd-v6.10 1107] compiled May 9 2006, 17:19:17
[newcamd-v6.10 1107] loading keys and roms
[newcamd-v6.10 1107] rsakeylist:49 parse error
[newcamd-v6.10 1107] Warning: File /var/tuxbox/scce/tpscrypt couldn't be ope
ned.
[newcamd-v6.10 1107] constantcw:3 parse error
[newcamd-v6.10 1107] constantcw:4 parse error
[newcamd-v6.10 1107] constantcw:6 parse error
[newcamd-v6.10 1107] constantcw:7 parse error
[newcamd-v6.10 1107] constantcw:13 parse error
[newcamd-v6.10 1107] constantcw:14 parse error
[newcamd-v6.10 1107] constantcw:16 parse error
[newcamd-v6.10 1107] constantcw:17 parse error
[newcamd-v6.10 1107] constantcw:18 parse error
[newcamd-v6.10 1107] constantcw:19 parse error
[newcamd-v6.10 1107] constantcw:21 parse error
[newcamd-v6.10 1107] constantcw:22 parse error
[newcamd-v6.10 1107] constantcw:23 parse error
[newcamd-v6.10 1107] constantcw:24 parse error
[newcamd-v6.10 1107] constantcw:25 parse error
[newcamd-v6.10 1107] constantcw:26 parse error
[newcamd-v6.10 1107] constantcw:27 parse error
[newcamd-v6.10 1107] constantcw:28 parse error
[newcamd-v6.10 1107] constantcw:29 parse error
[newcamd-v6.10 1107] constantcw:30 parse error
[newcamd-v6.10 1107] constantcw:31 parse error
[newcamd-v6.10 1107] constantcw:32 parse error
[newcamd-v6.10 1107] constantcw:34 parse error
[newcamd-v6.10 1107] constantcw:35 parse error
[newcamd-v6.10 1107] constantcw:36 parse error
[newcamd-v6.10 1107] constantcw:37 parse error
[newcamd-v6.10 1107] constantcw:38 parse error
[newcamd-v6.10 1107] constantcw:39 parse error
[newcamd-v6.10 1107] constantcw:40 parse error
[newcamd-v6.10 1107] constantcw:41 parse error
[newcamd-v6.10 1107] constantcw:42 parse error
[newcamd-v6.10 1107] constantcw:43 parse error
[newcamd-v6.10 1107] constantcw:44 parse error
[newcamd-v6.10 1107] constantcw:45 parse error
[newcamd-v6.10 1107] constantcw:47 parse error
[newcamd-v6.10 1107] constantcw:48 parse error
[newcamd-v6.10 1107] constantcw:49 parse error
[newcamd-v6.10 1107] constantcw:50 parse error
[newcamd-v6.10 1107] constantcw:51 parse error
[newcamd-v6.10 1107] constantcw:52 parse error
[newcamd-v6.10 1107] nagra au supports roms: 3 7 10 11
[newcamd-v6.10 1107] keys and roms loaded
[newcamd-v6.10 1107] cws client UDS:0 connect: No such file or directory
[newcamd-v6.10 1107] cws UDS:0: Connection failed
[newcamd-v6.10 1107] cws 127.0.0.1:10000: Connection refused
[newcamd-v6.10 1107] cws 127.0.0.1:10001: Connection refused
root@dm600pvr / # [newcamd-v6.10 1107] start decoding servid 0cea, pmt 0025.
[newcamd-v6.10 1108] trying caid 0602, ecm 0ffa, provid 000000, emu
[newcamd-v6.10 1108] caid 0602, provid 000000, ecm 0ffa, key 001006 is incor
rect
[newcamd-v6.10 1108] caid 0602, provid 000000, ecm 0ffa, key 001006 is incor
rect
[newcamd-v6.10 1108] caid 0602, provid 000000, ecm 0ffa, key 001006 is incor
rect
[newcamd-v6.10 1108] caid 0602, provid 000000, ecm 0ffa, key 001006 is incor
rect
[newcamd-v6.10 1108] caid 0602, provid 000000, ecm 0ffa, key 001006 is incor
rect
[newcamd-v6.10 1108] can't decode
[newcamd-v6.10 1118] trying caid 0602, ecm 0ffa, provid 000000, emu
[newcamd-v6.10 1118] using caid 0602, ecm 0ffa, provid 000010, key 000006,
cw delay 0 ms, date 180c, chanid ff7a
and now its saying:
root@dm600pvr ~ # newcamd -d
[newcamd-v6.10 11:20:48] compiled May 9 2006, 17:19:17
[newcamd-v6.10 11:20:48] cws_tcp_port_open: bind: Address already in use
[newcamd-v6.10 11:20:48] cws_tcp_port_open: bind: Address already in use
[newcamd-v6.10] scce_open: Device or resource busy
[newcamd-v6.10 11:20:48] Error opening scce device. All emu and cws will be disa
bled.
[newcamd-v6.10 11:20:48] Error: nothing left to do
however i am still getting pictures....
i really don't understand at all
also noticed that the yellow encryption icon isn't going green when the channel is decrypted.
it used to go green with CCcam 1.7.1 and 2.0.0
should i clear everything out and start again maybe?
Here are the ppua 2 lines of code can you show us what is happening to the ppua file please, (getting overwritten)
(do not post your real keys !!!)
0602:000000:00:0001XXXXXX:aa aa aa aa aa aa aa aa
0602:000000:00:00c3YYYYYY:bb bb bb bb bb bb bb bb bb bb
XXXXXX is the provid
aa's are the PMK
YYYYYY is the HSN
bb's are the HMK
Reinstalling the newcamd 6.10b might be a good idea too.
Become a Premium Member and support the Austech Forum
kcsoft (30-10-09)
are you using a image with your 600?
Last edited by z1gg33; 29-10-09 at 06:48 PM.
If you feed ducks at a pond, chances are your bound to feed a goose or two without even knowing it.
nope, i think that if you running a pli image, seems to be the best going round. sorry casey ima scratching my head on this... i'm sure austech can get it working for you. (too many gurus here too not do it)...
all i am thinking, is a re-image, which is a pain... as it take time... and no guarantees it solves your prob anyway
in previous posts you mention its working. is that still the case? my limited understanding is if you want AURORA(ird1) channels then this works, if you want NDS (f0xtel) then something else has to happen first. sorry I could not help.. I am sure someone will or it has been posted somewhere.. best of luck.
If you feed ducks at a pond, chances are your bound to feed a goose or two without even knowing it.
kcsoft (30-10-09)
Bookmarks