How to Configure both card slots in dm7020

**marty 17** · 03-03-08, 07:40 PM

Maybe Z80 can help me ? as I cannot get my austar sub card to work in either slot. Marty

**z80** · 03-03-08, 08:31 PM

I saw this somewhere....

The newcs xml file in var/tuxbox/config:-

<newCSconfig>
<readers name="Phoenix">
<device>
<name>phoenix</name>
<type>phoenix</type>
<node>/dev/tts/0</node>
<mhz>600</mhz>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<crypto-special>No</crypto-special>
<PTShandshake>No</PTShandshake>
<carddetect>no</carddetect>
<newcamd_port>6666</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
</device>

<device>
<name>Internal lower Cardreader</name>
<type>sci</type>
<node>/dev/sci0</node>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<carddetect>no</carddetect>
<newcamd_port>7777</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
<crypto-special>No</crypto-special>
<irdeto-camkey>A2A3A4A5A6A7A8A9</irdeto-camkey>
<irdeto-camkey-data>45D2D094A62F1AC323A257C848549BEC3EBE992B8E68A 125B513A69D01764760DBC4FC160077677DC28B7E708F38F01 4E7388E96817AC9DDC8149984EB43A12F</irdeto-camkey-data>
<PTShandshake>No</PTShandshake>
</device>

<device>
<name>internal Upper Cardreader</name>
<type>sci</type>
<node>/dev/sci1</node>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<crypto-special>No</crypto-special>
<PTShandshake>No</PTShandshake>
<carddetect>no</carddetect>
<newcamd_port>8888</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
</device>

</readers>

<cache>
<emm>20</emm>
<ecm>-1</ecm>
</cache>

<debug>
<level>normal</level>
<type>init</type>
<output>console,tcp</output>
<console_options>normal,init</console_options>
<tcp_port>3001</tcp_port>
<tcp_options>normal,init</tcp_options>
</debug>

<newcamdserver>
<enabled>Yes</enabled>
<name>newcs</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>

<user>
<name>Local</name>
<password>Local</password>
<au>on</au>
<sidoverride>on</sidoverride>
</user>

<user>
<name>user1</name>
<password>password</password>
<au>on</au>
<sidoverride>on</sidoverride>
</user>

<user>
<name>user2</name>
<password>password</password>
<au>on</au>
<sidoverride>on</sidoverride>
</user>
</newcamdserver>
</newCSconfig>

And the full cccam.cfg file from var/etc
################################################## ############
# remove hash for desired operation

#N: ipaddress portnumber username password 01 02 03 04 05 06 07 08 09 10 11 12 13 14 2

#the following will read any card that is in any of the slots including the serial port with a phoenix
#epsilon card must go in lower slot at front
#gamma only works in phoenix at 6 mhz
#------------------------------------------------------------------------------------
#these 3 lines make the server a client to itself
N: 127.0.0.1 6666 user1 password 01 02 03 04 05 06 07 08 09 10 11 12 13 14
N: 127.0.0.1 7777 user1 password 01 02 03 04 05 06 07 08 09 10 11 12 13 14
N: 127.0.0.1 8888 user1 password 01 02 03 04 05 06 07 08 09 10 11 12 13 14
#------------------------------------------------------------------------------------

#The following will connect to a server on the net either as well or instead of the 3 cards above

#N: server.dyndns.ord 9999 remoteuser remotepassword 01 02 03 04 05 06 07 08 09 10 11 12 13 14 2

#note the 2 at the end for an internet server that means two modem routers away including our one

################################################## ###############

Happy with that?