not using whitey
Dear All,
Just wanted to know if anyone else is seeing their CS setup behaviour deviating from the norm?
I have an XP server running NewCS 1.5 reading from my nd$ pox card which then shares to two DM500s on my local LAN running CCCAM 2.0.7....
All of a sudden some channels have gone off the air mainly fox sports and movieone, movietwo, moviewgreats and movieextra.
I pop the card back into my orginal box and those channels come up with the "To upgrade your subscription" message. I pay for the whole package so I know they are coming through.
Funny thing is my setup has never done this before. It has been working soundly for months, and I have never had to update my card manually by popping it into the original box...
Anyone having this problem? Any news on what hte big boys might be doing?
Thanks
Look Here -> |
not using whitey
card is missing updates by the sounds of things.
Not on the network you mention but yes. To the extent many are reverting back to NewCS 1.20 or 1.30 and some are changing from the CCcam client altogether (me included).
Reverting back to CCcam 2.4 as a client has limited results, which I guess you have found already.
You will note I started a thread about this last week if you look back in the list.
thanks jonc and z80...I kinda figured as much that updates were not coming through.
Uninstalled ccam 2.0.7 and installed 2.0.8 left it run over night and the channels were back in the morning...
Dont know if upgradding the ccam had a direct effect, will keep this thread updated if not.
try newcs 1.31 and mgcammed 1.25 or ccam 2.0.4
Chief
thanks seems to be up and running with 2.0.8 will post of it falls over again
Well I reverted back to ccam 2.05 because of all the strange NewCS 1.5 behaviour I was experiencing.
1. NewCS 1.5 randomly reints the card, i.e.....
ECM -> USER1 (OK)
ECM -> USER2 (OK)
[loader] Reinit card with caid 09xx
[loader] reader type 2 on node com1
...
ECM -> USER1 (OK)
...
2. I get random pixelation/freezing for a say 3 seconds on all clients. Checking the NewCS output doesnt show signs of bad ECMs or client logouts...looks quite normal actually.
3. Sometimes NewCS renders itself silly by continually logging in and logging out users.
This is all happening on XP server running NEWCS 1.5 all clients on Pli Iolite 2008 ccam 2.05 no wireless all hardwired 2 local lan clients and 1 WAN client.
I have since changed users AU ccam setting from on to off for all but one and will see how she all fairs.
Plantagenet,
I have been having the same issues. Have a couple DM500s using CCcam 2-2.0.08 and found working to either a linux or XP PC using NewCS1.5 and 1.6Beta seem to get the REINIT problem, and then the continual re-logging of clients, which then requires a reset of the application to get pics back. [at 357 or 600 settings, ND$,JaycarMkII]
When I've run the application off one the DM500s I have had no such problems, using both the external reader or internal card slot.
Did you find a solution? Did the 'au' setting affect opertaion.
I will do some more testing, and report any new results.
Well my NDS fell over again.
Ran ok for 3 months. Didnt need to update it manually within this period at all.
Running Newcs 1.5 still but all clients on ccam 2.0.9.
Still getting the re-init problem. It comes and goes.
Tried NewCS 1.6 but it crashes on loading...bah.
Been searching for a solution to the re-int problem. Its hard to pinpoint because it happens so randomly.
Could nayone offer any advice?
Have you tried adding this to NewCS?
<blockga>Yes</blockga>
no I havent but before I do...
whats it do?
Bookmarks