if ur getting atr off a card im pretty sure its working
does newcs identify the card?
slight off topic, but where are u located, and what sats the sky package on?
cheers
How can I tell if my new Phoenix actually works?
It's a USB one from Sattronics. Got a serial/USB driver from somewhere after searching for hours. Seems to work....there's no problems in the device manager in XP.
Put my SK* NZ card in with NewCS on XP and get the same thing if the cable is connected or not. Cable is good...just tried it on an external USB drive.
The LED flashes once or twice when I push the card in....that's the only LED activity.
I'm being helped by an Ozzie member of the forum...but we can get no further. Trying to find all the software is like looking for Rocking Horse crap....but that's the journey isn't it?
I have all the apps now....GGedit, FmCard...whatever....but don't know how to use them.
I just put an A*r*ra card in there and ran WinExplorer....Analyse Card....and got this....which means nothing to me (except that Reset Successful looks good). Someone might recognise something usefull.
*******************************
Trying to reset card...
Reset Successful
ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 20 56 31 2E 32 A0
Convention: DIRECT
Protocol: T=14
TA1 = 21
TCK = A0 Calculated TCK = 9B
Historical Bytes: 49 52 44 45 54 4F 20 41 43 53 20 56 31 2E 32
I R D E T O A C S V 1 . 2
Programming Voltage = 0.0 volts
Programming Current = 25ma
Maximum Clock Frequency = 6.0MHz
Assuming a 3.5790MHz clock:
Work ETU = 0.0001559095 seconds
Guard Time = 0.0018709137 seconds
Baud Rate After Reset = 6414
**************************************
A Jaycar kit is coming just in case this Phoenix is not doing it's thing. Monday is a holiday here so will not not get it till Tuesday. That's too long to suffer.
Help please.
Look Here -> |
if ur getting atr off a card im pretty sure its working
does newcs identify the card?
slight off topic, but where are u located, and what sats the sky package on?
cheers
Cool !!!
In NZ....SK* of of D1
Don't know much about NewCS....just learning...and my friend in Oz is sleeping....but I just ran NewCS on the A*r*ra card and got this
**************************
Reading Config file from newcs.xml
TCP-log password is enabled, set to: NewCSpwd
TCP-log set to simple mode
level: normal
type: init
output: console,tcp
logger config: level 1 type 3 output 5
Console log options: level 1 type 3
TCP log options: level 1 type 3
[ 01:59:25 ] [ Box detect ] Windows XP Build 2600
[ 01:59:25 ] [ Config ] Option <crypto-special> for device 0 (SkyNZ) not present, defaulting to NO
[ 01:59:25 ] [ Config ] Option <Seca-PPV> for device 0 (SkyNZ) not present, defaulting to NO
[ 01:59:25 ] [ Config ] COM3 ECM priority: round
[ 01:59:26 ] [ EMM Cache ] Initialising Cache with 20 entries
[ 01:59:26 ] [ ECM Cache ] Initialising dynamic Cache
[ 01:59:26 ] [ Loader ] Starting Telnet on port 1001
[ 01:59:26 ] [ Loader ] Reader type 2 on node COM3
[ 01:59:26 ] [ Phoenix ] Opening device COM3
[ 01:59:26 ] [ Phoenix ] Setting parity to ODD on node COM3
[ 01:59:26 ] [ Phoenix ] Setting 1 Stop bit on node COM3
[ 01:59:26 ] [ Phoenix ] Setting baud to 16457
[ 01:59:27 ] [ Loader ] Clearing all autosids on reader ...
[ 01:59:27 ] [ Loader ] Unknown card
[ 01:59:27 ] [ Loader ] Trying Irdeto (T=14)
[ 01:59:27 ] [ Loader ] Reader type 2 on node COM3
[ 01:59:27 ] [ Phoenix ] Opening device COM3
[ 01:59:27 ] [ Phoenix ] Setting parity to ODD on node COM3
[ 01:59:27 ] [ Phoenix ] Setting 1 Stop bit on node COM3
[ 01:59:27 ] [ Phoenix ] Setting baud to 9600
[ 01:59:29 ] [ Loader ] Clearing all autosids on reader ...
[ 01:59:29 ] [ ATR ] T=14 1etu=104.17us Guardtime:17etu WWT:9600etu
[ 01:59:29 ] [ ATR ] Historical bytes: I R D E T O A C S V 1 . 2
[ 01:59:29 ] [ Loader ] Init Irdeto card
[ 01:59:29 ] [ Phoenix ] Setting parity to NONE on node COM3
[ 01:59:29 ] [ Phoenix ] Setting 2 Stop bits on node COM3
[ 01:59:29 ] [ Phoenix ] Setting baud to 9600
[ 01:59:30 ] [ Loader ] Card 0600 on port COM3 failed
[ 01:59:30 ] [ Loader ] Starting Newcamd Server on port 45000
************************************
The S*Y card does nothing.
"[ 01:59:29 ] [ ATR ] T=14 1etu=104.17us Guardtime:17etu WWT:9600etu
[ 01:59:29 ] [ ATR ] Historical bytes: I R D E T O A C S V 1 . 2
with that displayed...
It looks like it is working perfectly to me.
Now it is the owner that needs work to get the rest happening....
sorry mate it isn't connecting to the card, you should get something like this if things are working...............
I didn't have a clue if the phoenix was working.....so now I know it is. I had to find a serial/usb driver....so wasn't sure if that was good or not. Problem is
I can't get even that far with the SK* card. Whether the cable was attached or not I got the same output.
I had an A*r*ra card that I decided to try .....that's what's posted here. I'm getting A*r*ra on the Dream already without the card. So that's not important.
SK* is the mission for now.....but I have to learn along the way like the rest of you. If anyone can help with that please see my other thread about it.
At least I know the phoenix works/sort of works. After this...I'm clueless. I've had a DB for about two weeks. I have the recording working....can create my own server...etc....al that stuffs easy. I'm good on a PC. Worked with PCDOS (IBM) and Fortran/Unix on a PDP-11 (anyone know what that is) before Billy Gates was on the scene with MSDOS...so I've been around a while.
Mudcrab...thank you....at least I now know what I should get with a card (A*r*ra) in the phoenix. That is of great help.
z80....thanks also for your comments.....now I need to find out some more concerning N*D*S and S*K*Y. (other thread).
there are plenty of dm500s images ready to go with your setup without the need for an external phoenix for an nds card, just use the internal slot.
A 7020 would be a better box for you with multiple cards of course.
i am sure fandtm66 will be along any minute to point you to an image.
NDS in New Zealand????
There's a German made 7020 on TradeMe now....but I've bought the DM500s and some other stuff. That is good for now
I've seen some images here in the forums but been hesitant to try....thought they were only for Oz!
Last edited by caribbeanchild; 08-03-08 at 03:45 PM. Reason: Clarity
he never sell the 7020 for that price.
I tried Chieflets 4.31 image with my SK* NZ NDS card. A*rora would not even work till I FTP'd Softcam Key, Autoroll Key, Autoupdate.Key to var/keys.
There was nothing in var/keys except the nagra folder.
If these files were not there then I think it obvious that there's no way in hell the SK* NDS files are there either!
I had a PM from a member last night with 3 files but they did not work. Thanks for that man....was worth a try....and once again you supplied me with a little more insight.
Any more ideas....anyone?
Bookmarks