Nokia 9500 and CAM firmware

[rexman]

Hi,
I am keen to dust off the old Nokia and see if I can get some use out of it.
It's beena while since I last used it and I understand that the CAM will need to be upgraded so I can watch Iredt0 II such as Aust*r. I was after someone who has first han knowledge of if Amon 5.4 will do the job for Aus. broadcasting or even better if they have a Nokia 9500 working with a subscription Aust*r card. I have opened the CAM and frankly I think removing the eprom and replacing it is a bit beyond me. Does anyone know who can offer this service if indeed it does work with Aust*r.

I have done a fair bit of reading in European forums and it seams as though Amon 5.4 may work but not sure here in oz.

Any help would be much appreciated. PS I know it would be easier to just get a newer receiver but that takes all the fun out of it.


Rexman

[Johnno]

Mines been sitting under the work bench for ages..
the last time i powered it on and tested my Ird2 card it worked fine..
i flashed it about 7-8 years ago (who remembers)...It's loaded with DVB2000.

[rexman]

Mines been sitting under the work bench for ages..
the last time i powered it on and tested my Ird2 card it worked fine..
i flashed it about 7-8 years ago (who remembers)...It's loaded with DVB2000.

Thanks for the reply Johnno. What version is your CAM my firmware version is 1.13e.

Rexman