I've seen this before when two clients are using the same login details.
Hi guys, newbie here!!
I've only recently joined the forum but was wondering if any one could shed some light on a little problem I am having.
I have a TM 9100s with a white s*y card installed. I am running CCcam 2.1.3 and Newcs 1.67 ND3. All is fine, can decode all channels and get all clear ones. But on the decoded ones I am getting a slight freeze, kinda like a stutter, digitizing image then gone. This is occurring every 7 seconds or so. And if you look close you can see the sound is a tiny bit out of synch immediately after a stutter.
I have searched the net high and low looking for a solution, but to no avail, so hoping someone on here may be able to help.
I'm thinking is it something in the code?
Below is my code for both CCcam and NewCS.....if someone can see anything wrong or needs adjusting.
Thanks guys!
CCcam:
################################################## ####################
# Connection #
# DM9100s #
################################################## ####################
N: 127.0.0.1 11001 ***** ***** 01 02 03 04 05 06 07 08 09 10 11 12 13 14
N: 127.0.0.1 11000 ***** ***** 01 02 03 04 05 06 07 08 09 10 11 12 13 14
################################################## ####################
#F lines #
################################################## ####################
# Other config settings #
################################################## ####################
SERVER LISTEN PORT : 7500
ALLOW TELNETINFO: no
ALLOW WEBINFO: yes
WEBINFO USERNAME :
WEBINFO PASSWORD :
TELNETINFO USERNAME :
TELNETINFO PASSWORD :
TELNETINFO LISTEN PORT : 16000
WEBINFO LISTEN PORT : 7501
ZAP OSD TIME :0
OSD USERNAME :
OSD PORT :80
# SERIAL READER :
# SMARTCARD WRITE DELAY :
# SMARTCARD CLOCK FREQUENCY
#SMARTCARD CLOCK FREQUENCY: /dev/sci0 6300000 #lower
#SMARTCARD CLOCK FREQUENCY: /dev/sci1 6300000 #upper
B: /dev/sci0 07
#B: /dev/sci1 07
# EMM Blocker
SHOW TIMING : no
DEBUG : no
NEWCAMD CONF :no
DISABLE EMM : no
EXTRA EMM LEVEL : no
MINI OSD : no
#CAM KEY
#CAMDATA
#BOXKEY: /dev/sci0 08 CB 28 DB
#BEEF ID :
#PIN :
SOFTKEY FILE : /var/keys/SoftCam.Key
AUTOROLL FILE : /var/keys/AutoRoll.Key
STATIC CW FILE : /var/keys/constant.cw
CAID PRIO FILE : /var/etc/CCcam.prio
PROVIDERINFO FILE : /var/etc/CCcam.providers
CHANNELINFO FILE : /var/etc/CCcam.channelinfo
# #
# LOADBALANCE : #
# TRY ALL CHIDS : #
# POSTINIT : #
# DVB API : #
# #
###############################################
####### DM9100s #######
###############################################
NewCS:
<?xml version="1.0"?>
<newCSconfig>
<readers name="Card Readers">
<device>
<name>lower</name>
<type>Sci</type>
<mhz>357</mhz>
<node>/dev/sci0</node>
<export>no</export>
<enabled>yes</enabled>
<blocksa>No</blocksa>
<blockua>no</blockua>
<blockga>no</blockga>
<boxkey>********</boxkey>
<!-- <boxkey>0000000000</boxkey> -->
<!-- <rsa>0000000000</rsa> -->
<irdeto-camkey>0000000000000000</irdeto-camkey>
<irdeto-camkey-data>000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000</irdeto-camkey-data>
<crypto-special>No</crypto-special>
<ipk>000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000</ipk>
<ucpk>00000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 000000000000</ucpk>
<PTShandshake>no</PTShandshake>
<carddetect>Yes</carddetect>
<newcamd_port>11000</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<sid>
<allow>
<!-- <id>0000</id>
<id>0001</id>
<id>0002</id> -->
</allow>
<deny>
<!-- <id>0000</id>
<id>0001</id>
<id>0002</id> -->
</deny>
</sid>
<priority>round</priority>
</device>
<device>
<name>upper</name>
<type>Sci</type>
<mhz>357</mhz>
<node>/dev/sci1</node>
<export>no</export>
<enabled>yes</enabled>
<blocksa>No</blocksa>
<blockua>no</blockua>
<blockga>no</blockga>
<boxkey>********</boxkey>
<!-- <boxkey>0000000000</boxkey> -->
<!-- <rsa>0000000000</rsa> -->
<irdeto-camkey>0000000000000000</irdeto-camkey>
<irdeto-camkey-data>000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000</irdeto-camkey-data>
<crypto-special>No</crypto-special>
<ipk>000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000</ipk>
<ucpk>00000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 000000000000</ucpk>
<PTShandshake>no</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>11001</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<sid>
<allow>
<!-- <id>0000</id>
<id>0001</id>
<id>0002</id> -->
</allow>
<deny>
<!-- <id>0000</id>
<id>0001</id>
<id>0002</id> -->
</deny>
</sid>
<priority>round</priority>
</device>
</readers>
<radegastserver>
<enabled>no</enabled>
<port>10001</port>
<allow>
<hostname>127.0.0.1</hostname>
</allow>
</radegastserver>
<cache>
<emm>20</emm>
<ecm>-1</ecm>
</cache>
<httpd>
<server><port>3002</port><enabled>yes</enabled></server>
<user><name>newcs</name><password>newcs</password><accesslevel>admin</accesslevel></user>
</httpd>
<debug>
<password></password>
<level>normal</level>
<type>init</type>
<output>console,tcp</output>
<console_options>normal,init</console_options>
<tcp_port>3001</tcp_port>
<tcp_options>normal,init</tcp_options>
</debug>
<newcamdserver>
<enabled>yes</enabled>
<name>newcs</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<user><name>*****</name><password>*****</password><au>off</au><allow>lower</allow><allow>upper</allow></user>
</newcamdserver>
</newCSconfig>
Look Here -> |
I've seen this before when two clients are using the same login details.
in these lines don't use the same user name
N: 127.0.0.1 11001 box1 box1passwrod 01 02 03 04 05 06 07 08 09 10 11 12 13 14
N: 127.0.0.1 11000 box2 box2password 01 02 03 04 05 06 07 08 09 10 11 12 13 14
Adobe.
maybe a good idea to edit your boxkey out of your previous post
Newcs is the server and Cccam is configured as a client (but Cccam can also be a server and client to itself). Even though they are both running on the same box it's still set up as a server and client to its self.
Leroy
XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS
Ok, have read loads and learnt a bit....there is only one client and one server running on my box....this I know by http'ing into both cccam and newscs.
So what could be causing this problem?
What I have noticed is as it happens, the sound hiccups first, then a second later the image pixelates, only slightly, then returns to normal for about 6 seconds then repeats.
I have a nice strong signal at all times with no errors.
Last edited by bossian; 21-12-09 at 11:13 PM. Reason: added more info
Thought I would have a look at the debug code being spat out by newcs and it seems that this error is in fact every 8 seconds!! As each line of code spits out it corresponds exactly to the problem!! This is what is being generated....
[ Newcamd ] ECM -> pswd (OK) [CAID 0963] [Prov 00000000] [SID 11FF]
Actualy, after running this test a few times now, it's not always 8 seconds, it can vary by 1 or 2 seconds each time. But every time the debug data is sent, the problem does occur at exactly the same moment. So it seems to me that whatever this code means, its connected to my problem.
And also, I can see on the screen that it occurs when the ecm time updates too!
Last edited by bossian; 22-12-09 at 01:27 AM. Reason: more info
Bookmarks