Can't share from te CI slot.
Leroy
first of all merry xmas and happy new year to all members.
i have a gamma v5.3card having problems working in db500s & db7000 for cardsharing internal,i have read all the information regarding cccam config tried all possible ways still no go .i have also tried an external cardreader connected to the db7000 mastera 111,the best i can do is blank screen but shows the green light as a working.any help .i have update my old ci unit with new software got it to work in the db7000 ci slot but still wont cardshare around the house.
Look Here -> |
Can't share from te CI slot.
Leroy
XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS
all up and running after 5days of headbashing..thank you to euro and turk forum members....yes leroy you can cardshare via the ci via gbox and via cccam.you need the right version but.
leroy
i got the info from the ci and pasted it in the config file of cccam and added the required details.its all in the config file of cccam but you need the correct one and the correct image for the dm7000. if you use the wrong image on the dream the ASC number is different but the CAID number stays the same.this is why it took me a few days to get it to work[again thank you to euro and turk forum members].the config needs the prov oo,card serial,asc number,caid number.there was no luck with the dm500 will try with the external reader.
the CI slot is the slot that takes a cam.....just to clarify.
Leroy
XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS
blade
i'm using the dm7000 original box had it for over 5yrs[the good old days] as it has ci slot.this is up and running now with 2cards.the 500c i'm trying now but trying to find a similar image to what the dm7000 has the only image that i found that was similar was the eagle image.
cheers
dongiorgio
Interesting dongiorgio. I was always under the understanding that you cannot share from a cam.
A couple of questions.
What type of cam is yours and
Could you please post your CCcam.cfg ?
(make sure you blank out your HSN)
Thanks in advance
blade
one in the card slot top or bottom [nds card]the other card whitey in a modified ci cam or the new mk11 smit cam.as i stated out in my first post.
dongiorgio
i just went thru the whole channels, i only found to have one problem the ci channel breaking up all the others fine including the extras.
Last edited by dongiorgio1959; 05-01-10 at 07:59 PM.
there are 2 versions of 5.3
dose yours work in a strong box or only a modified box/cam
blade and dizzy
internally works well with the other boxes sharing ,having slight pixelation problems externally on the extra channels ,i let me mate in qld connect via CS.he told me that the nds channels work well,the extra via the whitey our breaking up every 30sec for about 1sec ot two sec still very watchable,he explained to me timing issue between the ci and cccam.
dizzy
i dont use strong boxes. i know it works with the next hdtv,mediastar hdx9100 and the oct918 in the card slot i have a modifield ci cam which had the chip changed two weeks ago and new firmware put on.also works in the new smit ci mk11 selling for around $100 irdeto only.
cheers dg
Last edited by dongiorgio1959; 06-01-10 at 10:30 AM.
Bookmarks