jgm (16-01-10)
Could someone please tell me under the 1st post link for oscam which file do I download. Thanks
the binaries are in the forum area, the first link is to the source.
Cheers
Davo
Decapper (21-01-10)
Decapper,
I think you will find this is one of the latest oscam files which also has the EMM Nds patch.
There still seems to be errors in the emm logs.
Decapper (21-01-10)
Thanks.. was doing my head in there for a while... (easy to do
there will always be errors as not ALL emms/ecms are meant for your card/s. so when sent to your card if its not for yours it will error. most will be addressed to the group that error and not a big issue as long as your UPDATEs are processed correctly.
so in this instance we need to see what emms are not making it to the card and then request that they do. I have a blue card I just haven't had a chance to play yet. I been playing with a sub ir2 card for a mate. Now that's all going I will have time to look at the NDS side next week and have a look at what i can achieve.
Just found another issue:
I have a DM600 with PLI Jade & bluey serving to 2 x Mutant 200S PLI Jade (all 3 running CCcam 2.1.3) and a Relook 400S with neumo 3.2 & CCcam 2.0.0. Today I upgraded to oscam-0.99.4svn1277. Tonight for the 1st time since running oscam, I tried to record one program on the 400 while watching another. It was a complete disaster with the watched program breaking up every few seconds. I dropped back to oscam-0.99.4svn1232, but it didn't improve. I'm now back to a straight CCcam environment everywhere until SWMBO is out of the house again so I can try new things.
Solved. Just updated to oscam-0.99.4svn1306 & recording on one channel while watching another is OK now. ALso have the 10 minute freebies back on fbo. I just need to order a movie to check if EMMs are getting through.
I'm not logging any more - using too much space, & poor signal to noise ratio.
I'm not worried about wasting an fbo order - if oscam misses an EMM update,
i can switch to CCcam server temporarily, call f**tel & get them to give the card
a kick & change back again. I usually record fbo movies on the 400s in case anyone
in the family wants to watch them later, so not really worried if I have to wait for a later screening.
Last edited by jgm; 23-01-10 at 12:45 PM.
No worries but Im not suggesting you log the stream.
Just reboot the server and check the iniitial card comms to confirm entitlements details.
I know there are some people out there that would find this information below helpful.
How To Setup SkyIT 093b Card with Ubuntu / Debian + OSCAM + SMARGO + CCCAM
Thanks @ markformosa
'' This is a step by step guide how to get your SkyIT NDS3 093b card back up and running. With Ubuntu or Debian and with a Smargo Reader.
Some linux skills and CCcam experience is needed here as I am not going in detail on how to use these.
In Ubuntu / Debian :
1. Stop your CCcam server session and leave it down.
2. Make sure your CCcam is not setup running at system startup, OSCAM needs to run first.
3. Make sure your CCcam is not trying to open your Smargo usb port. Place a # in front of your CCcam line where you activate your reader.
4. Download the latest version of OSCAM. Currently I have tested with 0.99.4.528svn-i686
5. Copy and set chmod 755 rights the above oscam binary file. I placed file in /usr/local/bin/
6. In /usr/local/etc/ create 3 files as follows: oscam.conf oscam.server oscam.user with the below data within it:
for oscam.conf:
[global]
nice = -19
WaitForCards = 1
[monitor]
port = 988
aulow = 120
monlevel = 0
[newcamd]
key = 0102030405060708091011121314
port = 34000@093b:000000
for oscam.server:
[reader]
Label = SkyItalia
Protocol = mouse
Detect = cd
Device = /dev/ttyUSB0
mhz = 357
EMMCache = 1,1,2
Group = 1
CAID = 093B
BoxID = place your boxID here, I have not tested without it
for oscam.user:
[account]
user = user
pwd = pass
group = 1
uniq = 1
caid = 093b
ident = 093b:000000
AU = SkyItalia
monlevel = 0
7. Now Simply shutdown your linux server. Power off motherboard so SMARGO reader has no power then turn server back on.
8. When server is up, run oscam from /usr/local/bin/ like this: ./oscamfile -b
9. Check file located in /var/log/oscam.log this should give you good news.
10. Place N line in CCcam.cfg
N: 127.0.0.1 34000 user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
11. Run your CCcam and test.
Hi,
I run older version 8xx something on Debian, my entitelments are not read correctly, something 1997... probably need to put in newer version, especially the one with http monitoring
I didn't updated yet as it works great with orange.
With smargo it runs with MHz=600 and Card MHz=600 so it is overclocked I assume. With 2 DVB-S2 cards on my W7 HTPC I can watch one and record another channel with no worries. O-pen S-ource CAM is really great and support is exellent at straemboard.
Cheers
When I run this OSCAM it cant find the config files...
But on my 7020 I cant access that dir... Which one do I throw the config files in thanksCode:can't open file "/var/tuxbox/config/oscam.srvid"
Using wrong OSCAM... ignore last request thanks
Bookmarks