My advice is to contact LG Support.
If you're in Australia go to .
Contact details are half way down page.
Hey guys
Sorry to dig up old threads...
Desperately after a firmware update for my 42LG30D
Currently I believe it runs 3.07
Having hellish trouble with HDMI being recognized on PCs. 4 PCs tried and 3 different cables.
Also what is the procedure of updating?
Many thanks
My advice is to contact LG Support.
If you're in Australia go to .
Contact details are half way down page.
Morning all,
Thread revival. Also having the known 9 channels software fault with my LG 32LB9D. I have contacted the LG Recall Line, they told me the TV is not the issue, it was at Broadcaster Nine released an update which broke it, and its not their problem. Would not comment any more about it. LG will not provide me the Firmware Update and told me it has to go to a repairer here in Perth for the update at my cost.
I have called the 2 LG repairers in Perth, told them the story, they both want $100 to look at it, then whatever it costs following that for a 5-10 min Firmware Update. The TV isn't worth that, so before I have to buy a STB and I never buy an LG product again, does someone still have access to the Firmware update? I believe the file itself is "32LB9D-AD_V3[2].28_HD-Download.epk"
Appricate any help.
Cheers,
KS
Merry Xmas all,
I too need to get the firmware update for the LG 42LG30D TV - my firmware is 3.06 (quite old) and gave LG a call - five minutes of my life wasted talking to a drone on the phone , I guess it is russian roulette if you get someone who can actually help - he gave me a local repairers contact , big mistake it was like I had insulted him asking for help fixing my own TV ... , please be nice all I'd like is to fix a TV that LG themselves stuffed up the firmware. If anybody can help it would be very very appreciated.
Cheers,
J
Necro thread but it helped me a lot. Registered just to post my fix. Old 47LG70YD TV with all the HDMI's dying. Found a firmware upgrade solution but couldn't get it installed, searching lead to this thread and I found a solution, so posting for others who come here the same way.
Guy below is correct, spam 7 while highlighting options icon in menu. Comes up with expert firmware mode but no way to select file. At this point pull out the usb and plug it back in, it auto detects and starts installing.
3.14 firmware up from 3.00 fixed all the HDMI issues (which were either broken or hazy lines like a dirty VHS tape) crystal clear now.
47lb9df latest firmware can anybody help
Got an lg with that resets itself self on certain channels
would like to try a firmware update before turfing it
can anybody help
lg support wanted me to talk to a sevice centre
Last edited by hikaru; 06-12-18 at 04:44 PM.
Hello Members
If anyone could please post firmware for an LG TV 47LG65YD, it would be Greatly appreciated.
Cheers.
Hello
Good Morning
I am trying to track down the following bin file:
LG60_FRC Series : 42LG61YD-AC, 47LG61YD-AC, 47LG65YD-AC, 52LG65YD-AC => filename : AUS_42_47LG61YD_47_52LG65YD_FHD_FRC_IC101-IC102(LGE7363C)_V3.18.00_3875_2009-09-10.bin
Any help would be much appreciated.
Cheers
Dan
Junior Member
Junior Member
Junior Member
Junior Member
Is there any software update for LG 32LE2R led tv of 2006, to allow to receive hdmi hdcp 2 encrypted signal (from PS4 console), it seems to only accept hdcp 1.4 otherwise it blanks.
Thank you for any informations.
Bookmarks