Until there is a final tool to upload firmware please follow this procedure:
1: Connect the Linkeasy to your pc via a straight through cable. You will need a 5volt 1amp power adapter.
2: Download the new firmware and utility from here
3: Download Cygwin here
4: Download and install all packages
5: When you click on the icon for the fist time it will create your home dir probably c:\cygwin\home\yourname
6: Copy the two files that you downloaded from point 2: into there
7: Start Cygwin from your desktop
8: Type ./flasher.exe -v (will give version)
9: Type ./flasher.exe -b (will activate bootloader)
10: Type ./flasher.exe -f 256_r360.CST (will take some time )
11: There may be long pauses. If it stops all together, repower the device and start again. There are no problems if it does this
12: You will now be able to access the Linkeasy webif and configure it to connect to a newcamd, cccam, gbox or radegast server via sssp
13: You can login to the Linkeasy via the default username is "admin"
Here are some examples of the required lines to connect to a cccam or a newcamd server
CCCAM Server
CCCAM ipaddress port username password
Example CCCAM 192.168.1.1 10000 linkey linkey
NewCS Server
NEWCAMD ipaddress port username password deskey
Example NEWCAMD 192.168.1.1 10000 linkey linkey 01 02 03 04 05 06 07 08 09 10 11 12 13 14
Bookmarks